GolfGTIforum.co.uk

Model specific boards => Golf mk2 => Topic started by: Rickymk2 on 13 July 2019, 11:41

Title: Fuel pump
Post by: Rickymk2 on 13 July 2019, 11:41

Hi hoping someone can help me I have a mk2 1.3
That I plan to swap to an 8v I’m going to use mk3 tank
And pump ect am I able to just use the mk3 pump
Wiring from the pump to fuse box will this just be all plug and play
Or do I need to change any of the wires over ect
It’s a ce2 car I’m fitting it to

Title: Re: Fuel pump
Post by: vr6 south on 20 July 2019, 18:26

Check the pressure rating of each pump. If they are the same you shouldn’t have any issues. They are probably 3 bar.

Title: Re: Fuel pump
Post by: Simeon on 22 July 2019, 17:45

MK3 tank and wiring loom, will plug straight into your fusebox, job done. Only engine the MK3 GTi / VR6 tank won't run is the KR 16v.