Right, here are the specs:
Audiobahn AW1251T 12" subwoofer features:
12" natural sound subwoofer with dual 4-ohm voice coils
2 or 8 ohm operation
400W RMS Power Handling
1400W Max Power Handling
Frequency Response: 24Hz - 1000Hz
Efficiency 92.1dB
Poly coated 2 layer non-pressed paper cone
Non-pressed, Non-Transfer Paper cone
2" 4-layer ASV Voice Coils
PHAT Foam Surround
Bumped and vented polished T-yoke
KM3' Coated for virtually No Cone Distortion
Multi-connect Lug Lock Terminals
Chromed gasket and magnet mesh cover
45 oz Strontium magnet
Mounting dimensions - Depth: 5 1/4" Hole: 11 1/4" Diameter: 12 1/4"
THE PROBLEM I NEED SOLVING:The subwoofer has 2 Positive Terminals and 2 Negative Terminals ... I haven't seen this before! ... I want a 2 Ohm Load to my Mono Amp which is 2 ohm stable providing 300w RMS, so I believe I connect, negative to negative, and positive to positive, and then run a wire from positive to the positive on the amp and a negative to the negative on the amp.
The thing is, each terminal has 2 slots ... so in total 8 slots, 4 for positive and 4 for negative ... do I run double speaker wires then to fill each slot? so 2 positives to 2 positive, and 2 neg to 2 neg etc?
------
Here's a pictue of the sub ...