GolfGTIforum.co.uk
Model specific boards => Golf mk2 => Golf mk2 how to guides + info => Topic started by: Agreeable Slick on 06 February 2006, 13:01
-
Right just been perusing the mk2 section and a lot of people ask for part numbers. So here is my thought, everyone put their request in here for part numbers (for mk2s - pm the model mods in other sections if you want a similar idea in the mk1,3,4,5 sections) and whoever can help put the part number and item description in reply. Then once a week i will come and tidy it all up so we have a comprehensive list of part numbers for commonly asked for parts, in a nice tidy thread.
cheers
-
I.E.
191 998 135 A - 1 set of mounting parts for the spot lights from VAG.
056 919 081 E - Oil Pressure Switch (1.8 BAR 1 pin White)
068 919 081 - Oil Pressure Switch (1.4 BAR 1 pin Black)
068 919 081 A - Oil Pressure Switch (0.9 BAR 1 Pin Grey)
Etc... posts will be deleted once they have been answered and listed/described. SO REMEMBER TO CHECK BACK HERE IF YOU ASKED SOMETHING.
-
- Organisys
321 601 025 H - G60 Steel Wheel
871 601 171  - Black Wheel Cap ( 142mm Diameter)
321 601 171 C - Wheel Cap
-
lift pump for a digi = 191 906 092 AD
-
lift pump for a digi = b 191 906 092 AD
just a correction if someone can mod jimbo's got a lift pump this morning
K-Jet & Digifant Lift pump <89         191 906 092 AD
Digifant In Tank Lift pump 89> 357 906 092 C
-
171 919 379 A - Temp Sensor - 2 Pin
049 919 501 - Temp Sender - 1 Pin Black ( diesel & Turbo Diesel )
049 919 501 - Temp Sender - 1 Pin Black ( 16v - There are about 4-5 in the engine)
026 906 161 - Temp Sensor - 2 Pin White ( Mono Jetr)
-
Just a few more part #s for various temp sensors :)
171 919 379 A - outside air temp sensor for MFA - £17.64
025 906 041 A - Digifant 'blue temp sensor' for ECU - 2 pin, blue - £9.68
251 919 501 D - temp sensor for dash gauge - 2 pin, black - £17.64 :shocked:
049 919 563 A - oil temp sensor for MFA - 1pin, white - £12.19
035 919 561 A - oil pressure sensor for VDO gauges 0-5/1.8 bar - 2pin, black - £59.07
Prices do not include VAT :)
-
Stan:
191 853 042 - Trim Foil for Rear Hatch
+ 701 853 585 - Body clips
357 853 586 D - Grommets
171 877 651 = Wind Deflector
443 877 681 D is the hinged arm left
443 877 682 D is the hinged arm right
-
For Gambit:
026 133 551 - 16v injector, coarse thread - £30 (looking at it, this includes the top & bottom seal)
034 133 557 E - 16v injector top seal 6x5.2 - £2.02
035 133 557 A - 16v injector bottom seal, bottom of metal 'top hat' 9.8x1.4 - £1.88
034 133 555 A - 16v threaded upper insert - £3.19
035 133 554 - 16v lower plastic insert - £1.41
035 133 557 - 16v lower insert seal 16.5x19.5x1.5 - £0.87
Pegasus is correct:
321 601 025 H - 6J x 14 ET38 - Manhattan, Madison - £34.48
357 601 025 M - 6J x 15 ET35 - Redline, Blackline, Golf G60 - £33.66
Prices do not include VAT :)
-
Some other random bits, as always VAT is not included:
1H0 711 183 - MK3 weighted shift rod - £11.01
3B0 955 531 - MK3 variable intermittant wiper relay - £26.99
161 711 141 D 1BX - MK2 G60/Rallye/16v Proper leather gear knob - £19.98
191 798 116 A - gear lever ball/housing repair kit - £11.20
-
Anti slim jim plates for the doors (will fit both front & rears):
191 837 273 - rip plate - left - £3.07
191 837 274 - rip plate - right - £3.07
Basically what you do is unbolt the door lock block, and it slips into the hole. They only go in one way, which becomes obvious when you do it as there are 2 holes in it that the bolts pass through :)
As you know, quoted prices don't include VAT :smiley:
-
The slim jim plates are listed for:
89-95 Scirocco/Corrado
90-92 Golf/Jetta (must have been a later part, it will defo fit earlier MK2s as well)
88-97 Passat/Santana
To be clear these arn't the Armour Door Plates you get which fit around the outside door handles, these go inside the door and protect the lock mech from Slim Jims :)
-
oil pressure censor '92 MK2 8valve
056 919 081 C (0.15 - 0.45 bar)
Like the code that Slick#13 put down but slightly different.
Hope this helps
-
Protect foils (black vinyl trim strip) for under side skirts on '90 spec Mk2 Gti's:
Left = 193 853 805
Right = 193 853 806
-
Ignition lead router/tidy (as fitted to manifold on Mk3 - may fit Mk2)
037 905 497 (not shown on ETKA)
-
right if been fishing around looking for part number for the VAG reducer pipe
so ive think ive found it here. part number 18 on diagram. can someone try & find the part number for it!!
http://www.vagcat.com/epc/cat/vw/GOSY/1989/67/50/710986/#18
part 2 on this one
http://www.vagcat.com/epc/cat/vw/GO/1989/92/50/1033859/
its a dual clip
NB: THIS DOES NOT WORK AS A REDUCER PIPE!!!
-
191 253 141 F - dual exhaust clip MK2 8v downpipe -> front silencer - £7.36+VAT :)
-
more numbers!
http://www.vagcat.com/epc/cat/vw/GO/1990/110/56/1095238/
numbers
16: bellow
17: cover cap
-
191 971 916 A - front door cable rubber bellows - deleted
191 837 865 - cover cap end of front door - 46p+VAT
-
PAS belt splash guard kit:
191 825 250 A 01C - cover (big bumper models) - v-belt - £20.29+VAT
191 825 250 01C - cover (small bumper models) - v-belt - £20.29+VAT
N 901 066 01 - snap nut - £0.36+VAT (x2 only for small bumber guard)
Also need:
N 015 946 1 - hex head pannel screw - £0.29+VAT (2 needed for small bumpers, 1 for bigs)
N 902 076 01 - washer - £0.41+VAT (2 needed for small bumpers, 1 for bigs)
N 043 885 1 - hex head pannel screw - £0.29+VAT
N 011 665 3 - washer - £0.10+VAT
811 807 577 C - nut insert - £0.32+VAT
-
Gambit:
191 853 515 D 2BC - protection strip for door - left
191 853 516 D 2BC - protection strip for door - right
both discontinued though :(
-
Frog:
191 711 173 B - MK2 relay shaft - £30.46 +VAT
-
any idea what the part number is for the hose wrapped in gaffer tape and israeli handcuffs in the picture below
(http://i10.photobucket.com/albums/a122/jamesie78/DSC00003.jpg)
heater matrix hose ^^^^^^
191 819 373 D (to be cut to length)
-
GSF is the best place for these, I'd remove the bypass valves altogether:
18004 HEATER HOSE (FEED) 8v - £9.45
18004B HEATER HOSE(FEED) 16V - £11.50
18005 HEATER HOSE (RETURN) All - £9.45
If you don't want to bin the valves you can just buy the required hose and cut to length :)
-
FAO: Stan Deezy
1. If its blue, has 2 pins and is a push fit into the coolant hose flange on the front of the block, then its famous blue sender, see part number earlier in this post :) If it has a screw thread, then I THINK its this one:
035 919 369 M - thermal switch, white, digifant - £25.19+VAT
2. 171 121 407 F - Square tank - £23.29+VAT
1H0 121 407 A - Round tank - £26.95+VAT
3. 443 121 321 - Square tank cap - £8.78+VAT
1H0 121 321 C - Round tank cap - £5.42+VAT
4. With a bit of fiddling yes, the brackets are different. The old bracket is spot welded to the suspension turret and the new bracket bolts on. The level sender plug is different also so you'll need to chop one off a later VW and solder it onto your loom.
5. If you mean hoses from GSF, mine have been fine for nearly a year now, cant see any degredation. From VW:
191 819 373 D - Return hose - £14.82+VAT
191 819 371 E - Feed hose - £16.80+VAT
-
FAO: Pegasus
1. 027 129 717 F - upper gasket - £10.15+VAT
037 129 717 F - lower gasket - £3.19+VAT
2. 035 133 554 - lower insert for injector - £1.41+VAT
034 133 555 A - upper insert for injector - £3.19+VAT
035 133 557 - injector insert seal - £0.87+VAT
3. 037 133 073 A - t'body gasket - £2.14+VAT
-
044 103 609 D - sump gasket - £18.23+VAT (how much?! Get one from http://www.vwspares.co.uk instead!)
N 902 716 02 - allen key head bolt (combi) - £0.38+VAT
026 198 025 C - rubber rocker cover gasket kit w/ studs - £9.00+VAT (actually cheaper for the kit than it is to buy the gasket on its own!?)
-
037 133 382 - plastic angled connecting piece, MK2 8v Digifant ISV hose -> inlet boot - £2.86+VAT
-
321 877 209 A - sunroof seal - £36.50+vat
No hall sender listed for the digifant dizzies :(
-
You are correct!
357 601 025 M - 6Jx15 ET35 - £33.66+vat
321 601 025 H - 6Jx14 ET38 - £34.48+vat (CL,GL chrome couloured?)
191 601 025 K - 6Jx14 ET38 - £29.97+vat (GTI)
-
this is the temp. sender for pre '88 digifant. ( this was replaced by the 'blue' temp . sender in later models;
035 919 369 m around £30.
-
All early GTI seats have single piece seat base foams, which means any pre-90 GTI passenger seat will do ;)
Only the post 90 spec MK2 seats had 3 piece ones :)
191 881 375 D - £58.53
Listed for:
84-89 Golf/Jetta
84-93 Cabrio
82-88 Passat
82-94 Polo
Best you start looking for a passenger seat base ;)
-
06B 103 485 B - MK2 16v oil cap - deleted :(
06B 103 485 C - MK3 16v oil cap - £4.10+VAT
Only difference is that the MK3 cap will have a warning about not overfilling the oil because it will damage the cat
-
192 721 335 H - clutch cable self adjusting - £28+vat
192 721 335 G - clutch cable - £17+vat
Don't bother with the self-adjusting cable, the manual ones are better and will last longer normally.
-
020 945 415 A - switch for reversing light - 2 pin - £7.51+VAT
-
It will fit on ok, it isn't actually listed for the Golf G60, but it is for the Corrado. The correct centre for the Golf G60 wheel is:
357 601 149 D V7L - £9.69
Which is flat & silver :)
-
heater element under the inlet manifold for golf 1.3
026 129 893 - £67.08+VAT
-
ECU temp sender is listed on the 1st page ;)
192 721 555 A - throttle cable 8v & 16v - £15.16+VAT
-
871 601 171 - wheel cap - £3.87+VAT
055 121 121 F - connecting socket - £5.58+VAT
-
Here are a couple more...
035 133 557A. Set of 4 injector seals.
020 141 073A. Green gearbox end cap.
-
3 light switches listed, no idea which is which, so confirm the # off your old one before u buy:
191 941 531 K - light switch - £16.37
191 941 531 L - light switch - £16.37
191 941 531 M - light switch - £16.37
191 941 535 B - fog light switch - £11.94
191 953 235 - hazard switch (pre 90- spec) - £9.67
191 959 621 B - switch for heated rear window - £9.67
191 959 855 01C - electric window switch - £15.61
191 919 550 - holder for rear door electric switch - £2.32
191 959 561 - 4 door electric window lockout switch - £11.94
321 959 565 - switch for electric mirrors - £17.68
357 953 519 01C - post-90 wiper stalk - £42.16
535 953 519 A 01C - post-90 wiper stalk with MFA - £44.73
357 953 513 F 01C - post-90 indicator switch - £38.03
535 953 513 A 01C - post-90 indicator switch with cruise control - £66.79
191 953 519 01C- pre-90 wiper stalk - £26.75
191 953 519 A 01C - pre-90 wiper stalk with MFA - £45.74
191 953 513 B 01C - pre-90 indicator switch - £17.68
191 953 513 C 01C - pre-90 indicator switch with cruise control - £44.73
Unlikly that you want these, but for completness:
533 959 855 A - switch for electric seats - £13.50
191 963 563 - switch for driver & passenger seat heating - £54.50
191 963 563 A - switch for driver side only seat heating - £34.45
191 941 333 - switch for headlight range control - £40.15
Prices do not include VAT :)
-
a few more , just picked em up today for my golf mkII 8v
V192 823 509 hood lock (bit with lil spring inc) 10.54 ex vat.
V191 711 173 B Relay Shaft (this is that lampost shaped bit with the rubber ball that hangs off , often find it disintegrates and just leaves a star edged plastic bit , gives massive sloppy movement on gearstick forward and backwards) costs 30.46 ex vat.
-
P V192 819 415C N/STK Deflector - the plastic scuttle under the bonnet. mention trade discount to any dealer and get it for £10 + vat
-
That is the correct part # for a MK2 16v yep :)
027 121 133 E - plastic coolant flange from front of cylinder head, KR/9a - £7.85+VAT
-
037 121 133 C - Flange £8.70 + VAT
Its the plastic piece that goes on the cylinder head and both temp senders go into it and 3 hoses.
(its for the 1800 Digifant 8V)
026 121 144 E - Flange £5.19 + VAT (Geniune VW part)
The one that goes onto the side of the head with one hose connecting
(also 8V Digi)
-
191 853 661 - Golf Grill Trim - £18.72 + VAT
165 853 661 - Jetta Grill Trim - £18.72 + VAT
-
048 109 129 - £11.15+VAT
Thats a generic pic, its actually a 1.8 lump there as it shows the back end of the cover seperate, whereas on the 2e the piece is built into the rocker cover.
-
From VW:
191 711 173 B - relay shaft - £30.46
From GSF:
71707C - GEAR LINKAGE SHIFT FINGER - 15.50
And no, it doesn't come with the kit :)
-
191 906 090 - main pump
no colour listed though! Don't remember mine being anything but silver when I serviced it...
-
037 905 237 AX - 2e distributor - £87.35+VAT
-
Bonnet catch:
192 823 509 - £10.54+VAT
Jacking point cover:
191 853 917 2BC - £3.78+VAT
-
Yup all dealer prices :)
Pop rivet - N 906 349 01 - 30p+VAT
Dunno if gsf do em, but make sure you get good quality ones that wont rust!
-
two of them end with 717 and 718 (rears i think) and two end with 817 and 818
ok found this
16V Flares/skirts(Same as G60 in Europe)
191-853-717-D - LF Arch (****replace D with "C" for 8v arches)
191-853-718-D - RF Arch
191-853-817-D - LR Arch (these 2 have g60 on them)
191-853-818-D - RR Arch ("       "      "   "   )
how do i know if there g60 or 16v? just seems the front two look narrower than the rear two , im guessing they are g60 as all of them end with the letter 'D' and this is the american reference which they didnt have small bumper models so 8v arches are the same a our 16v arches and these ones are all g60 arches, can some one confirm that the above numbers are g60 arches?
-
191-853-717-D - G60 front left Arch - £20.93
191-853-718-D - G60 front right Arch - £20.93
191-853-817-D - G60 rear left Arch - £34.27
191-853-818-D - G60 rear right Arch - £34.27
191-853-717-C - Normal big bumper front left Arch - £20.93
191-853-718-C - Normal big bumper front right Arch - £20.93
191-853-817-C - Normal big bumper rear left Arch - £34.27
191-853-818-C - Normal big bumper rear right Arch - £34.27
8vs & 16vs both got the smaller arches, only the G60 got the larger ones.
The reason for the confusion is that in the US they didn't get the G60, instead they got a 2.0 16v which was fitted with the G60 kit :)
-
ah cool thats good then , thanks rubjonny , all the bits i have match those codes you posted
191-853-717-D - G60 front left Arch - £20.93
191-853-718-D - G60 front right Arch - £20.93
191-853-817-D - G60 rear left Arch - £34.27
191-853-818-D - G60 rear right Arch - £34.27
so ive got the g60 stuff. :)
off topic , its about time some one compiled all these numbers and applyed it to one post imo , i know slick said he was going to but dunno if hes on much anymore , so i might sort that out on monday if a moderator can adjust this thread once ive done so :)
-
I think its this one:
191 919 823 - switch for gearshift and consumption indicator- back-up light - £30.83
-
Front Screen:
191 845 121 - seal £26.95
191 845 101 - clear - £60.45
191 845 101 A - green tint - £60.45
191 845 101 H - green w/ top tint - £94.79
191 845 101 E - blue - £167.43
Rear Screen:
191 845 521 - seal - £40.64
191 845 501 - clear no spoiler - £82.74
191 845 501 A - green no spoiler - £89.74
191 845 501 M - blue no spoiler - £121.98
191 845 501 - clear w/spoiler - £89.74
191 845 501 A - green w/spoiler - £101.78
191 845 501 M - chromelux w/spoiler - £172.09
-
191 837 477 A - front window slot seal - left - £16.10
191 837 478 A - front window slot seal - right - £16.10
193 839 477 B - rear window slot seal - left - £11.55
193 839 478 B - rear window slot seal - right - £11.55
193 845 217 A - rear quarter light glass seal - left - £14.83
193 845 218 A - rear quarter light glass seal - right - £14.83
Metal lower slot seal trims have been deleted :(
191 853 283 - front left
191 853 284 - front right
193 853 763 B - rear left
193 853 764 B - rear right
-
037 145 271 - PAS belt, Golf G60 - £4.97
The sill scuff plate clips have been replaced with a plug/grommet combo:
191 853 577 A - plug - 0.34
191 853 586 D - grommet - 0.33
-
Complete suspention refurb parts list:
(http://vwtech.no-ip.info/images/golf/frontsusp.jpg)(http://vwtech.no-ip.info/images/golf/rearsusp.jpg)
From AVS:
http://www.vwspares.co.uk/product_info.php?products_id=410 £7.68 x2 (part 7, front)
http://www.vwspares.co.uk/product_info.php?products_id=641 £1.94 x2 (part 5, front)
http://www.vwspares.co.uk/product_info.php?products_id=425 £3.35 x1 (part 13&14, rear)
http://www.vwspares.co.uk/product_info.php?products_id=430 £4.89 x2 (part 7, rear)
http://www.vwspares.co.uk/product_info.php?products_id=629 £3.98 x2 (part 10, rear)
From VW:
1H0 512 149 rear rubber spring seat £2.46 (x2) (part 12, rear)
8D0 512 097 rear snap ring £0.09 (x2) (part 21, rear)
N 022 150 1 front strut nut £1.41 (x2) (part 12, front)
-
191 971 926 B - rear panel grommet (33.5mm) - £3.62 - (post 90)
191 971 908 B - rear panel grommet (19.5mm) - £0.32 - (pre 90)
321 813 998 A - tailgate insert nut 8x8mm - £0.43
357 827 998 A - tailgate insert nut 10x8mm - £0.43
191 867 775 A 01C - parcel shelf hook - £0.26
-
sunroof seal is on page 3, bolt:
N 903 079 01 - hex head bolt, MK2 front door hinge - M10x15 - 92p
-
1H0 853 586 - rubber plug for rubbing strip clips - 34p
191 853 585 A - plastic clip for rubbing strips - 23p
-
MK2 Front engine mount bracket/starter motor bolts:
N 044 760 1 - allen key head bolt, M10x135 - £1.56+VAT x2
N 102 862 03 - hex head bolt, AM10x60-SW16 - £0.62+VAT
-
Theres 2 listed depending on the year:
Early:
N 019 700 2 - bolt, M8x30 - 1.06+VAT
Late:
027 903 555 - bolt - 9.24+VAT
I assume the late one is expensive becasue it comes with the toothed wheel thingy?
-
I think I know what you mean, number 16? Heres a part # breakdown:
(http://vwtech.no-ip.info/images/golf/020diff.png)
14 - £0.24+VAT x2
15 - £0,24+VAT x2
16 - £2.17+VAT x2
Or if you actually want to take the cup off and replace the seal behind it, you need the 'repair kit' #27 which is £8.70+VAT.
I've never seen a driveshaft seal actually fitted to a car I've worked on, but they do exist in ETKA :)
-
got 2x possibilities:
027 133 689 R - 8x3.7mm - 0.95+VAT (apparently theres 3 of these)
051 133 689 A - 8x8.5mm 0.82+VAT
-
026 198 025 C - 8v rubber rocker cover gasket - £10.98+VAT
026 198 025 C - 8v rubber rocker cover gasket kit w/ studs - £12.25+VAT
-
personally I think you're crazy, but heres the list:
Front:
8 - 191 412 341 - spring disc - £12.26+VAT x2
8 - 357 412 341 - spring disc, G60 - £12.26+VAT x2
11 - 171 412 369 - washer - £0.24+VAT x2
20 - http://www.vwspares.co.uk/product_info.php?products_id=501 (non G60) x2
20 - http://www.vwspares.co.uk/product_info.php?products_id=598 (G60) x2
Rear:
5 - 3A0 512 103 - lower spring disc (usually part of strut) - £10.10+VAT x2
6 - 321 512 109 - base (usually part of strut) - £1.31+VAT x2
8 - 191 512 117 - spacer slieve - £3.74+VAT x2
9 - 191 512 119 - ring - £1.31+VAT x2
15 - N 103 286 02 - hex nut - £0.23+VAT x6
16 - 191 512 339 - pressure washer - £1.31+VAT x2
17 - 191 512 340 - support washer - £1.31+VAT x2
18 - 191 512 337 - concave washer - £0.73+VAT x2
19 - 191 513 269 - protective cap (usually part of strut) - 0.24+VAT x2
20 - 191 513 425 - boot - 3.10+VAT x2
-
191 945 111 F - left - deleted
192 945 112 B - right - 34.50
-
If you change your sump gasket and replace it with a rubber (thicker) one these are the bolts you'll need
N904 234 02 M6 x 17mm .67p inc VAT
-
Lower shield from back of gearbox on big block engines:
068 103 648 D - cover panel - £14.24+VAT
F >> 1G-LW234 003
F >> 1G-LB037 030
068 103 648 K - cover panel - £13.38+VAT
F 1G-LW234 004>>
F 1G-LB037 031>>
The 2 codes underneath reference your VIN number, top part number is 'up to' bottom is 'from' :)
-
1H0 121 321 C - 90 onwards header tank cap - 5.99+VAT
191 845 121 - MK2 windscreen seal - 25.18+VAT
-
171 121 407 F - pre-90 kidney shaped header tank - 24.74+VAT
1H0 121 407 A - post-90 round header tank - 28.63+VAT
-
can get em from GSF:
18004 Feed pipe 1.6-1.8 8v
18004B Feed pipe 16v
18005 Return pipe 1.6-1.8 all
-
1H0 711 183 - mk3 weighted shift rod - 11.29+VAT
-
1H6 955 651 - washer pump - 27.86
Looking at that part number it might be a MK3 item, which has a different plug on it. ETOS notes you also need:
357 972 752 - flat contact housing - 3.95
357 972 741 A - single wiring seal - 0.39 x2
which seems to support that assumption. GSF will probably be able to sort you out with one, see if they have ones with the non-return valve in! You can tell it has by looking at the output pipes, the nr valve is a big round blobby bit on there...
-
1. think its this, pic isnt that clear:
191 611 797 B - retainer - 27p+VAT
2. the big metal clip things have been deleted and replaced with:
N 011 666 15 - washer - 16p+VAT
N 038 601 1 - nut, thread cutting - 0.10p+VAT
-
193 919 059 B
etos suggests it is deleted, etka gives price to be about £50+VAT :)
-
N 013 964 9 - Oval Panel screw - £0.12p x12.
191 867 149 - Loudspeaker Grill x2
191 867 139 - Detent Spring x2
191 867 133 - Storage box x2
-
191 853 717 A £29.60+ VAT.
-
028 919 081 D - oil pressure warning switch, 0.25bar - 7.65+VAT
N 903 059 01 - MK2 front bumper bolt, M10x73 - £2.05+VAT
-
Pre-90 arch trims:
191 853 717 A - left front - 55.09+VAT
191 853 718 A - right front - 55.09+VAT
191 853 817 B - left rear - 51.09+VAT
191 853 818 B - right rear - 51.09+VAT
-
357 412 329 - top mount, G60 - 30.69
1H0 953 513 C 01C - mk3 indicator stalk - 46.61
535 953 519 B 01C - mk3 wiper stalk w/ MFA - 49.31
Mounts I use 16v/G60 rear, 1.3 bonded rubber front & box. Febi ones from GSF/AVS have done me proud in the past, as you can see bit steep from VAG!
535 199 262 - rear engine mount, G60, 16v - 111.66
191 199 279 E - front mount, bonded rubber - 82.87
191 199 402 C - gearbox mount, bonded rubber - 49.8
191 955 531 - internittant wiper relay - 23.66
3B0 955 531 - variable intermitant wiper relay - 26.61
all prices not enc vat :)
-
there is an early mk1 part:
063 133 555 - 1.81+VAT
Cant say if it will work but a set of 4 wont break the bank.
063 133 555 A - is early MK2 and disconned
Just a thought, have you found out the engine code of it yet?
-
191711595A - short selector rod, MK2 1.6-1.8 5 speed - 1.7€
-
7 - 191 512 113 - upper spring disc - 11.10+VAT
8 - 191 512 117 - spacer slieve - 4.16+VAT
9 - 191 512 119 - ring - 1.49+VAT
10 - 191 512 131 B - bump stop - 14.92+VAT
12 - 1H0 512 149 - rubbber spring mount - 2.58+VAT
13 - 191 512 333 - lower rubber top mount - 4.16+VAT
14 - 191 512 335 - upper rubber top mount - 4.16+VAT
15 - N 103 286 02 - hex nut, M10x1 - 0.26+VAT
16 - 191 512 339 - pressure washer - 1.49+VAT
17 - 191 512 340 - support washer - 1.49+VAT
18 - 191 512 337 - concave washer - 0.79+VAT
21 - 8D0 512 097 - snap ring - 0.53+VAT
(http://vwtech.no-ip.info/images/golf/rearsusp.jpg)
-
Push fit temp sensor rubber seal, i.e. 2 pin ECU and temp on MK2, 4 pin on MK3 etc
N 903 168 02 - 0.94+VAT
-
028 103 500 - MK2 8v pcv valve (flying saucer) rubber bung - 2.73+VAT
-
MK2 tailgate numberplate fixing inserts:
321 813 998 A - >> 1G-N-004 000 (8x8mm) - 0.47+VAT
357 827 998 A - F 1G-N-004 001>> (10x8mm) - 0.47+VAT
the above is a chassis number break, which occured around august 91 :)
edit: but you cant know for sure what year your tailgate is, so best to measure the hole (and check there still is one :grin:)
-
oem MK2 ones discontinued, but SEAT part fits and is cheaper:
357 615 311 A - 280mm brake splash shield - 5.65+VAT
-
191 947 561 - MK2 golf boot light switch - deleted
might be worth a call anyway, I assume the part number has been replaced rather than dropped completly.
-
the double stud is not avail seperately :(
nut is 171 857 026 A, but discontinued. its only an M5 nut with a built in shoulder though, so easy to get. VAG might be able to quote a replacement part number if you give them the old number though.
If you mean the bolts with a bit of threadlock on that are 13mm and go into the slider pins, its 321 615 141 and that works for front & rear. again its deleted though, but VAG should be able to quote you a replacement number. If you go for 443 698 470, thats the part number for 2 of rubber slider pin boots, this will include special slider pin grease and also should come with 2 new bolts also. Yet again this number seems to be deleted, but VAG should be able to give you the replacemnt part number for it.
-
035 919 369 M - pre 88 digifant white temp sensor - 33.56+VAT
-
191 953 519 A 01C - 87-89 MFA stalk - discontinued :(
-
dont worry, found the number!
mk3 spring plates to fit mk3 mounts and mk2 springs
1h0 412 341
-
171 721 232 - clutch pedal stop - deleted :(
you can use a bolt and 2 nuts instead :)
-
probably a bit late now, but part numbers are:
1H0 201 653 F - strap, left - 14.43+VAT
1H0 201 654 C - strap, right - 14.43+VAT x2
same part numbers as MK3, so should be plentiful in scrappy
-
357 877 209 A - B3 Passat glass sunroof seal - 41.99+VAT
-
Looking for clarification on this part 192 612 105 C does anyone know if it's a 20mm master cylinder or 22mm
-
thats a brake servo, not a master cylinder. the master cylinder will have 20 or 22mm stamped on it somewhere
-
they're m6 nuts now:
N 011 183 12 - m6 nut - 0.23+VAT
-
just give em this part number:
049 919 501 - Temp Sender - 1 Pin Black
-
Hi
Found this in the garage, and must have left it off the car at some point!
191.819.713
thin strip of black plastic about 2 inches long.
Could it be the reason my fan does not blow through the front air vents :rolleyes:
Thanks
-
1. cant buy seperately, but it from simply bearings, you need size 12x19x5. I got the one with the dust seal lip:
http://simplybearings.co.uk/
2. 020 311 113 b - input shaft seal, 2Y gearbox - 5.62+VAT
3. 049 919 501 - temperature sensor 1 pin black - 27.45+VAT x3
-
think what you want is:
1J0 898 079 - 1 set: securing parts for armrest - 28.43+VAT
-
Could you get part numbers and prices/availability for:
2Y gearbox pushrod seal
16v backbox (don't worry, I'm sat down..)
Roof gutter trim clips
Front big bumper plastic 'fin trims' (the three black plastic bits that go over the joins between the upper and lower sections of the painted bit of the bumper)
-
020 311 108 A - pushrod seal - 14.48+VAT
big bumper 16v back box was dropped in 2009 without replacement :(
191 853 733 A - gutter clip - 0.5+VAT
front bumper fins dropped in 2010 without replacement :(
-
answered my own question, well almost. :smiley:
PAS gaitor 192 419 523F
Non PAS gaitor 192 419 523e (Obsolete)
-
191 953 515 A LN8 - 90spec upper trim - 7.57+VAT
191 953 516 A LN8 - 90spec lower trim - 9.93+VAT
191 953 515 C LN8 - pre-90 upper trim - 7.57+VAT
pre-90 lower trim NLA
-
http://www.vwspares.co.uk/g2filters.php
-
533 253 115 C - 6 bolt manifold gasket - 8.37+VAT
-
171 957 861 B - 020 gearbox speedo seal - 80p+VAT
-
N 019 538 2 - arb clamp bolt, M8x18 - 0.40+VAT
N 102 096 05 - rear subframe bolt, M12x1.5x65 - 1.79+VAT
-
6K0 129 607 S - SEAT Ibiza ABF airbox - 112.40+VAT
6K0 129 627 Q - SEAT Ibiza ABF air hose - 30.02+VAT
-
thats the 5th injector thermoswitch aye
043 906 163 A - 16v 5th injector thermoswitch, 2 pin brown, M14x1.5 - 74.40+VAT
-
357 972 755 - abf injector rail plug, loom end - 4.73+VAT
357 972 765 - abf injector rail plug, rail end - 1.99+VAT
pins can be had from here:
http://polevolt.co.uk/acatalog/Junior_Power_Timer_Connectors.html
-
yes :)
443 837 063 superceeded by 8A0 837 087 - 1.69+VAT
443 837 064 superceeded by 8A0 837 088 - 1.69+VAT
-
i could be sarcastic :grin:
but some linkies so you can check by just looking, 50mm:
http://cgi.ebay.co.uk/Golf-Mk2-16v-Inlet-/150546283858
42mm:
http://cgi.ebay.co.uk/Golf-GTI-16v-Inlet-Manifold-/180609589566
note bulgyness of the 50mm at the lower end :)
-
027 129 717 F - upper gasket, 50mm - deleted :(
037 129 717 F - lower gasket, all - 3.69+VAT
upper gasket can be had from some places sometimes see em in head rebuild kits? give ecp a try maybe or look around on ebay
-
037 133 992 C - abf fuel rail elbow - 10.25+VAT
N 905 581 01 - abf fuel rail o'ing - 3.75+VAT (2 per rail outlet/inlet)
-
037 133 990 P - feed hose - 20.82+VAT
037 133 988 L - return hose - 26.87+VAT
-
023 129 101 - pressure regulating valve - 45.31+VAT
028 103 500 - pressure regulating valve seal - 2.98+VAT
-
Part number needed for hall sender please :smiley:
-
for your 16v I assume? ;)
052 998 065
its deleted, but you can get it from VW classic parts. not cheap though!
http://www.volkswagen-classic-parts.de/e_content.pl?src=e_cp_index
-
yep :grin:
It has 2 hall senders, ones $48 the others $138!
Best actually check if it is 100% broke with those prices!
-
I need to get the part number for the bits that hold the front ARB bushes in place on mk2 golf, small u-brackets, plus the 13mm bolts that hold them in too please.
I also need to get the part number of the 19mm bolt that hold the wishbone on.
Thanks in advance :smiley:
-
191 411 334 - MK2 inner ARB bracket - 1.65+VAT
N 019 538 2 - MK2 inner ARB bracket bolt, M8x18 - 0.40+VAT
N 100 874 03 - mk2 rear wishbone bolt, M12x1.5x74 - 1.89+VAT
N 904 840 04 - mk2 front wishbone bolt, M12x1.5x82 - 1.39+VAT
-
191 411 334 - MK2 inner ARB bracket - 1.65+VAT
N 019 538 2 - MK2 inner ARB bracket bolt, M8x18 - 0.40+VAT
N 100 874 03 - mk2 rear wishbone bolt, M12x1.5x74 - 1.89+VAT
N 904 840 04 - mk2 front wishbone bolt, M12x1.5x82 - 1.39+VAT
Thanks very much RJ :smiley:
-
part no. for front wings golf mk 2
-
191 821 021 E - mk2 golf left wing - 98.15+VAT
191 821 022 E - mk2 golf right wing - 98.15+VAT
-
part numbers please ( and list price if possible )
8v ( pb ) mk2 gti dissy cap and rotar arm..
many thanks in advance.. :wink:
-
just get em from here:
http://www.vwspares.co.uk/g2electrical.php
-
just get em from here:
http://www.vwspares.co.uk/g2electrical.php
im pretty anal when it comes to bits for the engine...would prefer oe parts...( 1990 model )
would you have the numbers..?
many thanks
-
rotor arm is 052 905 225 C, cost you 8.65+VAT. dizzy cap there are 3 depending on which dizzy you have, so i need the vw part number off it :)
-
rotor arm is 052 905 225 C, cost you 8.65+VAT. dizzy cap there are 3 depending on which dizzy you have, so i need the vw part number off it :)
can i pm you my reg no..? will that help..?
-
not really no, im not a dealer so i cant do reg or vin checks ;)
-
not really no, im not a dealer so i cant do reg or vin checks ;)
ok ...
thanks john..
-
gsf sell bosch parts, which are what vw would sell you anyway. avs sell beru which are oem quality. your call :)
-
Hi guys,
I have a 1990 mk2 16v and i need the part numbers for the exhaust manifold studs and nuts and the exhaust manifold gaskets and also the power steering pipe that goes from the rack to the pump not the one that goes to the reservoir.
Can anyone help me out please?
Thanks
Tim
-
other way round RJ!
VW/AUDI NO. 026906161
what is this part number??
-
Can I double check that this servo is the "right" one for my mk2 16v?
192 612 105 C
Ta muchly :smiley:
-
part number for the VOLTAGE REGULATOR for a mk2 16v please
thanks
-
Yo RJ, are there different types of M12 Wheel bolts for Mk2's, as I need some radius type for my Porsche wheels to fit to the adapters and found 3 in my stash with a VW stamp in them and a castellated rim (ooer!) but not too sure if they are a common fit, as the car is 40miles away?
Thanks in advance.
-
Part number for the rubber boot that goes over the steering rack as it comes through the bulkhead please :)
-
Part number for an oil pump (digi 8v engine), and price if possible?
Thanks
-
Part number for 4 stud 16in steel wheels from new style VW Beetle please.
Cheers in advance.
-
Part no for gaskets to oil filter housing and oil cooler please :smiley:
8v digi btw
Cheers
-
Part number for 8V digi PAS tensioning bolt please :-)
-
1988 8v PB motor (digi) fuel pump housing and associated bits ?
(Any suppliers who will ship parts to Oz ?)
Very much appreciated
-
Part number please for inlet elbow on front of engine block,H plate 1991 16v...
Thanks
-
Yo,
I need mk2 16v fuel pump, pipes connecting from the tank and to the metering head, and rear axle bush part numbers plz.
Lewy
-
Part numbers for the 4 double studs that hold the coolant pump to the block, and the aircon compressor bracket to the pump
051260821A
051260821
(http://i1061.photobucket.com/albums/t480/blueseamonkey/Untitled.jpg)
-
Dang, 16 pages, eyes are hurting....
Just after the P/number for the foliage cover gasket/seal (foam seal effort for the leaf cover :smiley:). I thought I had it down but it now illegible so need some help finding it, cheers
-
Does anyone know the part number for the white version of the blue temp sender?