Author Topic: dub268 - 1.8T  (Read 13031 times)

Offline jv

  • Administrator
  • Serious forum addict
  • *****
  • Posts: 7,212
dub268 - 1.8T
« on: 26 September 2009, 17:58 »
:)
Buy site stuff!
GolfGTI.co.uk - merchandise

Support the forum charity!
Forum Charity

dub268

  • Guest
Re: dub268 - 1.8T
« Reply #1 on: 27 September 2009, 18:18 »
Cheers JV

Right this is my 1st MK4 after moving away from a few mk3 of the last few years, mine last been GTI 8v

So on to the current and new toy,

Its a 99 1.8t AGU, Jazz blue, FVWSH, 125k on the clock and the winter pack

Droped into the local stealers where last few services have been done and had a chat with them about the car and they said that car has in the last 2-3 years has just about everything replaced from exhaust to bushes and also had its cam belt and water pump done at the start of the year so im happy  :grin:

The only thing wrong was that it was missing the cap from the front bumper where it covers the washer for headlights and a few stone chips on bonnet and a broken driver side sun visor and rear ashtray was broken aswell, so overall a very tidy and well looked after car  :grin:

This the only pic i have at the moment as i cant find my cam :angry:



dub268

  • Guest
Re: dub268 - 1.8T
« Reply #2 on: 30 September 2009, 18:47 »
List of things of that need doing in no particular order:

INTERIOR:
Black headling
Arm Rest
Rear ashtray
Drivers sun visor

Bora Illuminated Vents
Carbon Vinyl Centre Dash
Black Front & Back Door Handels
New Gear knob
Boost Gauge
Black rear view mirror
Rubber mats
Upgrade to immob3 Cluster

EXTERIOR:
Fix headlight washer jets
Badgeless grill
Jom Airblade Needs painting
De-Locked
Front & Rear VW Badges painted Black
Stubby Aerial
Front Aero Wipers

Mk5 Rear wiper
Black Headlights
Black Side repeaters
Black rear lights
Upgrade light bulbs
German style plates and surrounds

WHEELS:
Aftermarket 18" satin black

ENGINE:
R-Tech Remap :grin:
3"Down Pipe & 200 Cel sport cat needs fitting
Cat back system
oo7p DV
VR6 clutch/ABF Flywheel
Pipercross Panel Filter
Paint Engine Cover

CHASSIS:
upper & lower strut brace
Coilovers
ARB Kit
Engine/Gearbox mounts
Dog Bone Upgrade
EBC 312mm Front Brakes with Ferodo DS2500 pads
Paint Front calipers Blue
« Last Edit: 21 November 2010, 11:21 by dub268 »

dub268

  • Guest
Re: dub268 - 1.8T
« Reply #3 on: 14 October 2009, 23:09 »
Well here is my attempt at painting my engine cover and for my 1st attempt i dont think its come out to bad, i still need badage to go on cover :grin:







« Last Edit: 07 November 2009, 10:23 by dub268 »

dub268

  • Guest
Re: dub268 - 1.8T
« Reply #4 on: 25 October 2009, 19:38 »
Had couple hours spare today, so got around to fitting the Xenon lights blubs and painted the front VW badge.



« Last Edit: 07 November 2009, 10:25 by dub268 »

dub268

  • Guest
Re: dub268 - 1.8T
« Reply #5 on: 24 November 2009, 14:49 »
Got around to fitting my rear badge and my black rear view mirror that turned up this morning ill post pic later
« Last Edit: 24 November 2009, 18:17 by dub268 »

dub268

  • Guest
Re: dub268 - 1.8T
« Reply #6 on: 18 January 2010, 09:38 »
So i thought i would do a oil & filter change last weekend which should only no more then a hour for a quick drop oil, filter off and new one on and and some fresh oil put. Filter off is where it all went wrong   :cry: now ive done uncountable oil changes over the years but never came across one so tight it bent 2 screwdrivers & snap oil filter chain :shocked: so 4hr late and in darkness and numb(rained all day) i called it a night, following day the soon to be farther-law came around with a 2ft stake :shocked: :grin: so out comes the hammer and we set to on the filter, 20min this is the result :grin: sorry for poor pic




« Last Edit: 22 January 2010, 09:18 by dub268 »

dub268

  • Guest
Re: dub268 - 1.8T
« Reply #7 on: 22 January 2010, 09:23 »
So after the bad weekend with oil filter, postie turns on monday with these  :cool:






dub268

  • Guest
Re: dub268 - 1.8T
« Reply #8 on: 22 January 2010, 09:40 »
After i quick read from link northeast posted for me, cheers mate Clicky I had a few hours spare before work the other morning so i decided ill give it a go :smiley:




« Last Edit: 24 February 2010, 09:10 by dub268 »

dub268

  • Guest
Re: dub268 - 1.8T
« Reply #9 on: 22 January 2010, 09:48 »
Some Pic of it fitted in total 2hr job :grin:



Just need a new gear knob to finish it off