Author Topic: RNS 510 stuck in Boot Loop  (Read 3389 times)

Offline JIMMYBRODIE

  • Not said much yet
  • **
  • Posts: 43
RNS 510 stuck in Boot Loop
« on: 10 July 2015, 17:35 »
Hi my u it is stuck in boot loop after a firmware update.
I've got noting working, no camera, audio etc, I do have Dynaudio.

Can anyone help?

Offline JIMMYBRODIE

  • Not said much yet
  • **
  • Posts: 43
Re: RNS 510 stuck in Boot Loop
« Reply #1 on: 10 July 2015, 18:13 »
Does anyone know of anyone in Berkshire with VCDS?

Offline th3_f15t

  • I live here
  • *****
  • Posts: 1,060
Re: RNS 510 stuck in Boot Loop
« Reply #2 on: 31 October 2015, 13:29 »
I had a similar issue with my RCD510 with Dynaudio after some work on my car.

There are two things to try:

1.) Press the <, > and top right buttons and hold them for a few seconds. This can trigger a full reboot.

2.) Alternatively (which is what I did) press and hold the power button until the unit full reboots. This was what bought my unit back from the dead.

Hope this helps. :wink:

Moving over to Flickr, sorry for the broken picture links!