GolfGTIforum.co.uk
General => General discussion => Non-Golf gallery => Topic started by: RattyGTi on 21 August 2012, 19:57
-
Hey there guys & girls not bin on site for a while has had alot on so thought i best start a new project after my GTi got killed so here's the new project :smiley: :smiley:
• Engine 1.9TDi 90bhp
• Colour Red
• Vento Front End Conversion
• Smoothed Rear Bumper
• Full GTi Arches & Side Skirts
• Full Electric Windows All Round
• Vr6 Cloth Interior
• 6000k HID Blubs
• LED Sidelights
• LED Fog Lights
• Hot Tuning Coilovers Dropped 90mm All Round
• 16” 9j BBS Replica Wheels With 195/45/16 Stretched Tyres
• Full GTi Brake Set Up 280mm Front & 226mm Rear
Future Mods
Full Black Leather Interior
Rolled & Pulled Arches
As it stood when i first bought it
(http://i62.photobucket.com/albums/h102/ratisace69/Wagon/432f113b.jpg)
(http://i62.photobucket.com/albums/h102/ratisace69/Wagon/4e3254e2.jpg)
(http://i62.photobucket.com/albums/h102/ratisace69/Wagon/fd3adc9d.jpg)
Headlining
(http://i62.photobucket.com/albums/h102/ratisace69/Wagon/c667e82e.jpg)
First purchase :wink:
(http://i62.photobucket.com/albums/h102/ratisace69/Wagon/2bd5117b.jpg)
(http://i62.photobucket.com/albums/h102/ratisace69/Wagon/0d9d7177.jpg)
Few weeks later i went abit buts & thought i would do something to stand out abit more & bought these :wink: a week later i bought some 195/45/16 tyres go wrap them in.
(http://i62.photobucket.com/albums/h102/ratisace69/Wagon/6bf18899.jpg)
(http://i62.photobucket.com/albums/h102/ratisace69/Wagon/d25e365d.jpg)
Wide :wink: :wink:
(http://i62.photobucket.com/albums/h102/ratisace69/Wagon/3ca97985.jpg)
Then came the fun job of doing the full GTi brake conversion
Bye Bye drums
(http://i62.photobucket.com/albums/h102/ratisace69/Wagon/photo4.jpg)
Hello rear disc’s :wink:
(http://i62.photobucket.com/albums/h102/ratisace69/Wagon/photo3.jpg)
Front disc’s
(http://i62.photobucket.com/albums/h102/ratisace69/Wagon/photo.jpg)
Half way through & 1 side done
(http://i62.photobucket.com/albums/h102/ratisace69/Wagon/photo5-1.jpg)
Here how she stands at the moment :smiley: :smiley:
(http://i62.photobucket.com/albums/h102/ratisace69/Wagon/FFB69771-3E37-4D69-B8AC-593A1CCB6A55-10193-00000650729A47F6.jpg)
(http://i62.photobucket.com/albums/h102/ratisace69/Wagon/BFCEB29D-CA4F-49AB-9C83-8B461C596399-10193-000006506C6F8FA1.jpg)
Before anyone says it needs to go lower its due for MOT in the next few weeks so dont wanna mess about lowering it to raise it again so it will b going lower after MOT
-
It needs to go lower. :rolleyes:
-
Looking good mate :wink:
-
Love it!!!
-
when thats low its gonna look cool
-
This has heaps of potential :) I can't wait to see some post MOT lows!
-
Nice wagon.... Love the wheels and you've done quite a bit of good shizzle to it already. :cool:
Shame about the HIDs though.
-
It's a nice wagon although I think a badged grillle would look better.
-
cheers for all the good comments so far guys :) had a few problems with doing the brake conversion etc, so im running 13mm spacers on the front as the wheels were abit close to the caliper & 10mm spacers on the rear :), yea im also thinking a badged grill will look better :)
-
man up i slammed my wagon on its arse like 12hours before its MOT and still passed
-
Would look loads better with 7j's on the front and slammed.
-
Few ppl did say to me do 7's or 8's on the front but I see it as go big or go home so 9's all round it was
-
Few ppl did say to me do 7's or 8's on the front but I see it as go big or go home so 9's all round it was
What's the steering like at the front at slow speeds? A mate has a G60 Corrado with 9inch Borbets all round and that felt horrible! He will be switching to 7.5's on the front.
Would look loads better with 7j's on the front and slammed.
Gotta agree with Wayne, but either way it will still look sick slammed on its arse :)
-
Looking :cool:
You gonna colour code the rear bumper?
As previously mentioned,needs to go lower.
-
yea back bumper is getting colour coded mate & smoothed as it has cut outs in it from it having a towbar on when i bought it etc
-
hurry up and get your mot done I want to see this slammed!!!
looks sweet atm always loved wagon's got a soft spot for the mk4 variant aswell
-
Did u get this motor from Stockport? Looks very familiar, lol :)
-
(http://i62.photobucket.com/albums/h102/ratisace69/Wagon/12B77019-B203-422E-8779-ABD20C8A6DB8-9164-00000575E3FC8565.jpg)
(http://i62.photobucket.com/albums/h102/ratisace69/Wagon/7DF2E771-C58D-4A87-AF3E-4B8F992BA362-9164-00000575E9726866.jpg)
(http://i62.photobucket.com/albums/h102/ratisace69/Wagon/F8288FB2-6BE2-47F7-BD96-B62B5C2C3013-9164-00000575F187BCB8.jpg)
(http://i62.photobucket.com/albums/h102/ratisace69/Wagon/BAAE33C2-8C94-4C63-B6C5-517300252530-9164-00000575FBAD4E85.jpg)
Also due to my back box falling off which was horrid to start with & i never got round to takinng it off but over the weekend i replace with a section of pipe so just need to smooth the rear bumper :smiley:
(http://i62.photobucket.com/albums/h102/ratisace69/Wagon/73BC2B74-B97B-48C9-B290-A0C142142C78-9164-00000575DDE6EB45.jpg)
-
Looking great bud, keep it up :)
-
Looking great bud, keep it up :)
.......... or down :wink: :laugh:
me likes!
-
Haha, too true :)
-
also bought some gti side skirts to go on so i can finish the gti look off & also looking at doing a bit of camber to go lower :wink:
-
Lower, lower lower!
-
thats what im thnking mate nice bit of camber and lower as i can go :wink:
-
small update for you guys as its got to winter ive put the wagon into winter mode :smiley: ive also got a 2nd rear bumper to smooth the exhaust cut out so it will eventually be a smoothed bumper with hidden exhaust :wink: all done in the other halfs garage
(http://i62.photobucket.com/albums/h102/ratisace69/Wagon/1B1669BA-7D99-4874-A872-606AD1AF3590-8426-000003F7DABE4EA7.jpg)
as i got the bumper
(http://i62.photobucket.com/albums/h102/ratisace69/Wagon/0908267E-2C10-449B-8CC3-30ED99998DC9-8420-000003F764BA4B7F.jpg)
sanding started
(http://i62.photobucket.com/albums/h102/ratisace69/Wagon/C7171710-CFD4-41A6-919A-BB15816B8452-6174-00000303C253DADE.jpg)
as it looks now
(http://i62.photobucket.com/albums/h102/ratisace69/Wagon/F2668595-BFC9-4A09-814B-28113FD91CAB-7959-000003C92E0E6DAC.jpg)
-
Looking good dude, what muppet painted it blue. :shocked:
-
Nice work on the bumper mate! Are you gonna bridge the exhaust cut out with fibreglass or plastic weld in a new section from another bumper?
-
gonna plastic weld it with a section off my old bumper thats still on the wagon mate then will b ready for paint etc :smiley:
-
have also just got a vento front end for the wagon in flash red so will need painting tornado red :smiley:
(http://i62.photobucket.com/albums/h102/ratisace69/Wagon/B4A1B00A-AB48-427D-A478-02347C912B5D-2588-000000F2BC0B63C5.jpg)
-
Vento front............ <3
-
i always thought vento front ends were over done but it came up for the right price & i cudnt help myself but buy it so will be on after christmas sometime
-
Nice wagon mate had one myself a while back, the vento front end will look the nuts mate :wink:
-
not much of an update guy but the new back bumper is all ready for plastic welding the vento bonnet & grill are gettin started tonight & i shud have new front wings orederd in the next few days vento left front wing with no aerial hole & camber shim shud b ordered end of the month but im not sure if -1.5 will b enough to get my 9's in & go lower :undecided: does any1 know it it will b enough??
-
dint change the bonet over as im still prepping it for paint but this gives a rough idea as to how the front end will look with the vento front end on
(http://i62.photobucket.com/albums/h102/ratisace69/Wagon/C3F978E7-B71B-486C-82C9-4552A8ACB5BC-9974-0000042057D468E1.jpg)
-
Gives an idea as to how a Vento would look after a minor front ender. :kiss:
-
He's going for the crash victim look.
-
What is the et on the 9's?
What tyres? And what arch work have you done?
-
It will look good man! Keep your eye out for an earlier grill though as they look much better :)
-
the 9's are et20 mate & not done any arch work there on with 11/12mm spacers on front cant remember which & 10mm spacer shims on the rear its not as low as it can go tho need camber for that but will be going lower & yea i thought that dan gonna see how it all looks when its finished & then mayb get a different grill
-
Et20 with or without spacers? So without they would be et10 with them?
Camber is not enough!!! You need to roll the lip flat then push the arch out. Front will be a issue if you want to go really low. Put fall camber on the front too! Still might rub with pulled out arch.
Try getting smaller sidewall tyres. They give more room than narrow tyres.
Camber shims. Don't put the 20-20 at top. Have driver side at 18-18 and passenger side 22-22. Have numbers facing you when fitting on both sides.
If you want to go low then 17-17 and 23-23
-
how come you have bigger spacers on the fronts?
-
how come you have bigger spacers on the fronts?
To clear the caliper I should imagine
-
i did a 5 stud hub conversion off my old gti & the brakes are 280mm where as the standard estae ones are 256mm on coz of the et of the wheels when i tightend the wheel up it hit the caliper so needed abt 11/12mm spacers to clear the caliper by 1/2mm
-
the et20 is without spacers
-
So et10 on back and et8 on the front with 9" all round?
If your not good with metal then you will need to call a pro. To roll and flare your arch.
You won't ever tuck them bad boys lol
-
got a mate who mite b able to do it for me hoping i can keep the plastic arches if i flare them etc
-
Flared mine and still got mine on :wink:
-
Just make sure you get all the sealant off behind the arch before you do them ;) go wavy as hell if you don't!
-
cheers for advice guys will make sure i get everything done before i go lower hopefully gonna have the outside done before ultimate dubs
-
quick update my new vento wings arrived today for the wagon so no aerial hole in the wing lol
(http://i62.photobucket.com/albums/h102/ratisace69/Wagon/0E721DFD-A6BB-40FF-BFC3-F0F7AAA68A16-596-00000055D5CB5536.jpg)
(http://i62.photobucket.com/albums/h102/ratisace69/Wagon/6C047164-AEDC-478D-B6A3-422521BEE14A-596-00000055DCD7DD2D.jpg)
-
Nice wagon...vento front end will be a nice touch
-
another quick update after reading a few threads on here i decided to have ago at joeying the vento headlights as there not in the car atm
(http://i62.photobucket.com/albums/h102/ratisace69/Wagon/6E9DEB49-7DA3-470D-B4C8-EEEA38890807-2276-000000D302CD4F8A.jpg)
then with 3 coats of gloss black putting then back together this morning
(http://i62.photobucket.com/albums/h102/ratisace69/Wagon/5FA7DBF5-F964-44E8-A88B-D318369B8CF8-1015-0000005B3FA94A26.jpg)
now back together :wink:
(http://i62.photobucket.com/albums/h102/ratisace69/Wagon/36CEABA6-3CF0-4040-9626-FCBD0B86EC8D-759-0000004DEB7282BF_zps5908d747.jpg)
-
good work on the joeying.. did you use masking tape? purposefully didn't use any this time as last set I masked and took off the silver backing. then this time I did it perfect but scraped off the silver cleaning specs with a sponge! :angry:
-
Nah mate didn't use anythin just opened them up cleaned them then used a really fine paint brush & a steady hand to paint them
-
Nah mate didn't use anythin just opened them up cleaned them then used a really fine paint brush & a steady hand to paint them
aha. sick rims btw
-
cheers dude had a few complements about them on the car & they look good on it more lows to come this month ready for ultimate dubs
-
quick update guys & girls ordered my camber shims last week & got them the next day aslo coz some centre cap stickers
(http://i62.photobucket.com/albums/h102/ratisace69/Wagon/BB28F720-AE65-44F9-A0DB-B023367668AD-884-0000007258204A88_zps648a96aa.jpg)
(http://i62.photobucket.com/albums/h102/ratisace69/Wagon/9B8483BA-01CF-4024-B144-A7EEBEF6A9B2-884-000000725330D0E0_zps50740e06.jpg)
-
looks good so far mate........
(http://i302.photobucket.com/albums/nn116/flash-derby/263735_10152300510995085_1157956169_n_zps81630f71.jpg)
.....vento front will look good ;)
-
I recon you should go for golf front and black hella twins.. I love that look on red mk3s :smiley:
-
quick update folks as its the run up to ultimate dubs still got stuff to do mainly all painting getting done today & tomorrow heres how the rear bumpers goin all plastic welded over the weekend
(http://i62.photobucket.com/albums/h102/ratisace69/Wagon/2009A396-079D-4A01-A894-07735837927E-6046-000002B31A5092EF_zpsf1e6e35f.jpg)
quick fit to see how it looked & gotta say i like it alot
(http://i62.photobucket.com/albums/h102/ratisace69/Wagon/B2FA6315-CA23-461E-B8A3-CBC3FC84ECBD-6046-000002B31F31C3D8_zpsc63948ad.jpg)
-
Lovin the wagon bud just what I want to do, swap all the best bits over from my flash red colour concept !
-
heres an update guys & girls last week was a very busy week with painting panels & sorting evrything out to try get my car ready for ultimate dubs yesterday so heres the pics of how i got on came down to the wire saturday night started in the garage at 5pm
(http://i62.photobucket.com/albums/h102/ratisace69/Wagon/FF33F243-0E55-4CF1-9F1D-665295C75C68-5709-0000025192850119_zpsbfb0ec96.jpg)
by 6pm it looked like this after pullin the wings off as there were completely rotten
(http://i62.photobucket.com/albums/h102/ratisace69/Wagon/49D3709B-153A-4604-81EA-F8E49B4EE4BA-5709-0000025197AE0FFC_zpse381acab.jpg)
by 9:30pm it looked like this front gril was only rested in place as hte black on it was still dryin abit
(http://i62.photobucket.com/albums/h102/ratisace69/Wagon/CBA3741A-8E85-440A-A8A4-8532BAA3EAA2-5709-000002519EC473EB_zpsb509f87d.jpg)
by 10pm the back end looked like this with the exhaust cut out gone & bumper fitted
(http://i62.photobucket.com/albums/h102/ratisace69/Wagon/E9040479-7D69-49F2-8C4A-621BD8B8333C-5709-00000251A3592B59_zps3c590f42.jpg)
by 10:30 it looked like this with the grill in place properly the front wheels swapped over
(http://i62.photobucket.com/albums/h102/ratisace69/Wagon/EDF31F41-EA70-4C9B-96A4-111C3259342A-5709-00000251A8848356_zps871e8180.jpg)
then on sunday it looked like this in the queue for the car park so bought a copy of the stand inside :)
(http://i62.photobucket.com/albums/h102/ratisace69/Wagon/F5003584-02F8-4672-84AF-E8A564EF2A62-5709-00000251B28E9ED6_zps45bd5b0a.jpg)
all comments welcome :) :)
-
Looking great man! Sig I reckon :)
-
cheers dan was deffinatly a rush jobs getting it done on the saturday ready for ultimate dubs
-
Yeah, it looked like it all worked out though in the end?
-
yea it did dude got a few lil bits to finish off but im happy with it
-
yea it did dude got a few lil bits to finish off but im happy with it
you got any engine mods planned bud?
-
I love this!......those looks and diesel mpg's is a complete win... :smiley:
-
cheers gav nice to hear people like what ive done :) & yea dude planning on having it chip from 90bhp to 120 when funds will allow it & then hopefully next year im planning a pd130 engine conversion
-
Fecking awesome