Author Topic: swapping injectors  (Read 356 times)

Offline mar_k

  • I live here
  • *****
  • Posts: 806
swapping injectors
« on: 04 December 2011, 20:54 »
do the injectors need coding or can they just be swapped easily?

this is a 2.0 8v mk4

jamie16v

  • Guest
Re: swapping injectors
« Reply #1 on: 04 December 2011, 21:02 »
it would need mappping in.. no point though in my opinion unless you have good breathing mods such as ITB`s..

Offline mar_k

  • I live here
  • *****
  • Posts: 806
Re: swapping injectors
« Reply #2 on: 04 December 2011, 21:07 »
Its not for performance gain,
I suspect one of the injectors on my dads golf 2.0 is leaking.
no.4 sparkplug died. we replaced it with a new one. we pulled it out again after 50miles and it was wet and smelt strongly of petrol.
The co level is also high, I did think it was the coolant temp sensor but not so sure now

jamie16v

  • Guest
Re: swapping injectors
« Reply #3 on: 04 December 2011, 21:32 »
ah, in that case then yes... just swap over  :grin: