Also changed the CRD3 to setting 3 with no lights.
Only time will tell if I have anymore issues.
How are you finding it compared to program 1?
Haven't been out in it much but the short journey I did I found there to be much more "get up and go."
I thought it being on setting 3 and up would be totally unusable but its actually the total opposite.
So far so good.
programme is based on a file from Germany, and on plus 1 this produced 236.6hp and 377lbft, map 2 is one of our own and even though we don't recommend a "best setting", a lot of customers prefer this and map 3 over map 1.
Map 2 incidentally produced 234.5hp and 377lbft, and if i showed you the data it looks completely different.
Map 3 is based on map 2 but the reaction time on the box is slightly different, and the power band is extended between 4,000 and 4,500.
The best way to see/feel the difference is to hold the car in 4th gear and you "should" (sometimes people tell me the opposite) that the power drops off around 4,000 rpm on map 2, where as if you switch over to map 3 and drive in 4th gear to 4,000 you should feel that the power continues to pull to around 4,500 (these are all based on the crd3+ on its own)