Well after witnessing my beloved forest get humiliated yesterday by derby our bitter rivals I was in no mood to be around people so decided to spend some time on the golf.
I decided today was the day the 90 spec kit would be removed and rear bumper fitted.
Bumper removed and paint cleaned will need some fresh paint in next few weeks and bad areas ground down but quite happy with it for now.
Then I removed the rear arches which again there's minimal surface rust where the kit was fitted but overall I'm happy to give them a quick rub down in places paint and fit small bumper arches.
Unfortunately I wasn't so lucky with the fronts. Drivers side can be rescued.
Passenger is a lot worse so might get binned as I would like to know what the inner wings are like but that could be a can of worms I don't want to open lol so we will see I might just cut out the sh!t, as trim will be sat over it.
Trail fit of the estorils happy with how front sit, but will probably use a 10-15 mm spacer on the rears to fill arch a bit.
How she sits tonight looking all sorry for her self before I start getting rust sorted next week after work
Front bumper will be done once I source a decent one and as I found out today she's missing the lower metal panel so going to have to get one of them aswell.
One spanner in the works is I've found where the waters getting in my boot, got to find a reputable welder to cut this out and weld a plate in.
This is my rear inner arch god knows how it's rusted as the other side is spotless and no sines of broken under seal the other side