wiring

[crazydog]

hi guys i need to connect to an ignition fed source for a project,any ideas on what or where would be the easiest or best to find.all ideas welcome.   cheers.

[itavaltalainen]

Why don't you use terminal 15 from the potential distributors in central electrics?
Install an inline fuse holder with appropriate fuse.

[crazydog]

ok thanks excuse my ignorance where is terminal 15 are we looking at the main fuse box

[Ajamesc]

Why don't you use terminal 15 from the potential distributors in central electrics?
Install an inline fuse holder with appropriate fuse.

Remove the trim above the pedals and there's a fuse bored at the bottom wear the relays are there's a few studs. One constant live ones ignition live

[bgbazz]

Best and safest way to go. 

[crazydog]

ok thanks no prob panel came off easy as sugested wired into stud from ign.just as a matter of interest when i tested fir the ign stud i found the opposite end one had no live feed direct or ign,the others apart from the one i used from ign where all permanetly live. thanks again.