Author Topic: Recurring error code - 008568 bank1 system too rich off idle  (Read 4378 times)

Offline easy6666

  • Not said much yet
  • **
  • Posts: 19
Well don’t really want to part with my mk5 Gti  :sad: but having a recurring error code which my local garage
is having problems solving (not keen on throwing money at a 10-year-old car)

The car wasn’t running the best over the Christmas period, bit rough at idle (would start first time, but the revs
seemed to be a bit restless up & down) and when driving, it was if I had no modifications done to the car
(power way down) it almost felt with it being a DSG it didn’t know which gear to be in under hard acceleration.

Anyway got it checked out and the two error codes where DTC 008568 1/2 Bank 1: System Too Rich off idle, DTC 001089
2/2 evap Emission Control Sys.

Replaced the EVAP canister & solenoid valve, replaced cam cover breather, replaced recirculation valve
(all my modifications were done back in 2010 so nothings new, mileage approx 89000)

Collected the car from the garage felt better but just not right, a few days later engine management light on and
DTC 008568 Bank 1: System Too Rich off idle came back to haunt me

Any help would be appreciated?
 
Car details:
57 plate Gti, 3 door DSG,TBE, Remap, FMIC, Induction Kit
« Last Edit: 15 February 2017, 16:28 by easy6666 »

Offline Rhyso

  • Global Moderator
  • Sir Postalot
  • *****
  • Posts: 26,729
Re: Recurring error coded - 008568 bank1 system too rich off idle
« Reply #1 on: 15 February 2017, 12:23 »
Lambda sensor??

What are the emissions like??  Have the garage tested those?

Offline easy6666

  • Not said much yet
  • **
  • Posts: 19
Re: Recurring error coded - 008568 bank1 system too rich off idle
« Reply #2 on: 15 February 2017, 12:35 »
If they have tested the emissions I haven’t been privileged to the information... but no harm in asking  :wink:
« Last Edit: 15 February 2017, 16:29 by easy6666 »

Blazing Storm

  • Guest
Re: Recurring error code - 008568 bank1 system too rich off idle
« Reply #3 on: 16 February 2017, 22:18 »
It interests me that you say you have an induction kit. Could you have oil on the MAF causing the issue? Worth cleaning the MAF perhaps.

Offline easy6666

  • Not said much yet
  • **
  • Posts: 19
Lambda sensor checked and ok, also it seems the car is fine at idle
and the problem is occurring under load.

Looking like a trip to a rolling road for live data may be required  :sad:

Offline easy6666

  • Not said much yet
  • **
  • Posts: 19
Seems like the problem is solved  :wink:

Had a smoke test done, which flagged up my intercooler and hoses had seen better days
replaced those and now the old cars back.....for now lol