GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Golf mk4 gallery => Topic started by: sharki786 on 14 July 2013, 00:21

Title: CONFUSED!! 1.8t AGU
Post by: sharki786 on 14 July 2013, 00:21
Right as some peeps may know that i was after a 1.8t AGU full car. After a few weeks i found one and got a mate who is registered to that website to bid on it. Bidding started at 11 told my mate max i have is 500 atm. Won it for 440 and with fees it cost me 515. I wanted to strip it and keep the engine and what not for my mk3 anni. The car has recaro heated leathers climate control and sunroof :laugh:
Well car arrived and im HAPPY :grin:
F all damage apart from the fool who repaired it without trying to push the dent out and decided to fill the fecker with more filler thats in my mates body shop lol. A good 5-9mm of filler was put in the car. Spray was good but was a shade off. Its a silver but with a blue tinge to it. Threw in £7 Vpowaaaaah as it was VERY low on pety. And im having a problem when i rev it to 3k rpm it hunts and will only settle when i tap the gas pedal. Its will hunt under its idle. Drivers seat heats up but passangers wont. Engine is VERY sweeeeeet nice and quiet only hear the injectors and the charcoal filter.

Anyway pics:

My bredwin filling her up with v juice  :cool:
(http://i323.photobucket.com/albums/nn458/shako786/20130711_210844_zps1abd8f00.jpg) (http://s323.photobucket.com/user/shako786/media/20130711_210844_zps1abd8f00.jpg.html)

The recaros:

(http://i323.photobucket.com/albums/nn458/shako786/20130711_210812_zps1786741b.jpg) (http://s323.photobucket.com/user/shako786/media/20130711_210812_zps1786741b.jpg.html)

(http://i323.photobucket.com/albums/nn458/shako786/20130711_210805_zps6c4bb8a8.jpg) (http://s323.photobucket.com/user/shako786/media/20130711_210805_zps6c4bb8a8.jpg.html)

Ma cazan checking out the damage (just needs a screw to hold the bumper back into place but might just buy a used bumper from classifieds):

(http://i323.photobucket.com/albums/nn458/shako786/20130711_210753_zpsf42459a5.jpg) (http://s323.photobucket.com/user/shako786/media/20130711_210753_zpsf42459a5.jpg.html)

Righty then i decided to give it a good look over. Checked the oil and its BLACK (got some quantum 10-40 at home that i got from tps for cheaps. Anyway took coil packs out and tried to take the sparkies out but coldnt as i was using an ordinary socket (i know wrong tool, its what i had on hand) when i took the socket out it was covered in oil :huh: anyway my cazan got a proper spark tool out and i took the sparkies out. Looked like they were proper old, covered in soot and they are the ngk R sparkies with single electrode not double or triple. So took everything apart. Took the rocker off, cams, chain & tentioner all look good. Might service it tomoz if i have time.
Turbo is WAAAAY down. How do you guys change it?

Will be painting the rocker cover and what not.
Sorry not picies as hands were covered in oil and grease.
Oh btw im keeping the car and putting in back on the road :evil:
Its too good to break.
Sorry if i gave hopes to people.
The mk3 anni will be going into storage and will be maintaned. The body on the anni isnt in very good condition so will sort all that out.

Anyway i am after some performance parts.
Its all standard.
Will be throwing in hybrid blades and aiming for under 300 horses as dont want rods flying about then will upgrade the rods.
Im after:
3" straight through, will this work good with the k03 till i upgrade? got a 2.5" on way
S2000 cone filter with heat shield got, just need heat shield
K03s hybrid turbo
Fmic
007 diverter got it
Forge tip fitted
N75 delete?
Charcoal canister delete?
Leather arm rest
Anything else that im missing?

Please pm me with any parts that you have that i have mentioned.

More pics to come and empty pockets lols
Title: Re: silver mk4 1.8t AGU
Post by: Scott-R on 14 July 2013, 10:14
I have turbo etc very cheap in classifieds
Title: Re: silver mk4 1.8t AGU
Post by: swainy on 14 July 2013, 10:25
Will be keeping a eye on this, for what you paid you got a bargain. have been looking to make my daily a bit quicker.
Title: Re: silver mk4 1.8t AGU
Post by: sharki786 on 14 July 2013, 12:14
I have turbo etc very cheap in classifieds

I have replied to it for the zorst :wink:


Will be keeping a eye on this, for what you paid you got a bargain. have been looking to make my daily a bit quicker.

I know i have. Im realy chuffed with myself.

Will be changing oil today and new sparkies and paint rocker cover and get new rocker & sparkie seals and pickup pipe with cambelt kit with water pump.
Title: Re: silver mk4 1.8t AGU
Post by: Scott-R on 14 July 2013, 14:46
What is a zorst?
Title: Re: silver mk4 1.8t AGU
Post by: barrym381 on 14 July 2013, 14:47
What is a zorst?
exhaust init  :laugh:
Title: Re: silver mk4 1.8t AGU
Post by: Scott-R on 14 July 2013, 14:55
Away man you got a str8frew????????
Title: Re: silver mk4 1.8t AGU
Post by: Scott-R on 14 July 2013, 14:56
Or a D-K@!
Title: Re: silver mk4 1.8t AGU
Post by: sharki786 on 14 July 2013, 21:29
Ya brav. Its a zorst brrrr. Loud and im wearing my burberry clothes eni. Ima bad man deekhead. Lols only messing
Exhaust scott-r.
Anway. Decided to take the inlet off and the fuel rail.
As i have taken the rail off will i need to bleed the injectors??? :huh:
Also took the throttle off, what a mess!!!
Just using engine cleaner on the parts watching the oil and grease melt away.
Will upload pics later on as battery on phone id diying.
Also noticed the lower breather hose is split, the dipstick guide is mashup (broken scott-r) lol
Need new rubber pipes for the fuel rail and the inlet 2 small cotton braided hoses.
More to come.
Will be spraying the inlet and rocker.
What do you guys use on the engine to clear up the grease and oil stains??? Im scared as there are toooo many sensors on it.
Title: Re: silver mk4 1.8t AGU
Post by: sharki786 on 15 July 2013, 17:57
Right then. No luck with the degreasing as it was soo bad. Will try with another product. On the plus side, got some bits, rocker gaskets, inlet gaskets & oil filter and fuel filter. And a s2k green filter lol :evil:
Title: Re: silver mk4 1.8t AGU
Post by: sharki786 on 15 July 2013, 19:44
Right then some pics

Pure filth throttle

(http://i323.photobucket.com/albums/nn458/shako786/20130714_221229_zpsea542e7a.jpg) (http://s323.photobucket.com/user/shako786/media/20130714_221229_zpsea542e7a.jpg.html)

Some elbow grease

(http://i323.photobucket.com/albums/nn458/shako786/20130714_221238_zps1d153229.jpg) (http://s323.photobucket.com/user/shako786/media/20130714_221238_zps1d153229.jpg.html)

Need after pic of it nice and clean.

Under rocker cover, thick as anything

(http://i323.photobucket.com/albums/nn458/shako786/20130714_220901_zps66af3b58.jpg) (http://s323.photobucket.com/user/shako786/media/20130714_220901_zps66af3b58.jpg.html)

(http://i323.photobucket.com/albums/nn458/shako786/20130714_212751_HDR_zpsbea05b02.jpg) (http://s323.photobucket.com/user/shako786/media/20130714_212751_HDR_zpsbea05b02.jpg.html)

This shizzle is BAKED ON

(http://i323.photobucket.com/albums/nn458/shako786/20130714_212030_zpsb9428c24.jpg) (http://s323.photobucket.com/user/shako786/media/20130714_212030_zpsb9428c24.jpg.html)

(http://i323.photobucket.com/albums/nn458/shako786/20130714_211806_zps18057966.jpg) (http://s323.photobucket.com/user/shako786/media/20130714_211806_zps18057966.jpg.html)

As you can see a split bottom breather.

Should i replace with silicone hoses?

Also which hoses and how much are they?
(http://i323.photobucket.com/albums/nn458/shako786/20130714_182238_zpsd90d24db.jpg) (http://s323.photobucket.com/user/shako786/media/20130714_182238_zpsd90d24db.jpg.html)

Some bits that i got from gsf and tps

(http://i323.photobucket.com/albums/nn458/shako786/20130715_200554_zps9905bf3d.jpg) (http://s323.photobucket.com/user/shako786/media/20130715_200554_zps9905bf3d.jpg.html)
Title: Re: silver mk4 1.8t AGU
Post by: sharki786 on 15 July 2013, 19:51
Will update more pics tonight.
Also will give it some go with some swafega JIZZERRRRR oh yeah lol.
Title: Re: silver mk4 1.8t AGU
Post by: sharki786 on 15 July 2013, 19:52
How on earth do i get the fuel reg back on? Its impossible to get back on with out some g clamps.
Could someone help???
Title: Re: silver mk4 1.8t AGU
Post by: sharki786 on 16 July 2013, 22:09
Cleaned up the throttle

(http://i323.photobucket.com/albums/nn458/shako786/20130716_203548_zpsee2590c7.jpg) (http://s323.photobucket.com/user/shako786/media/20130716_203548_zpsee2590c7.jpg.html)

Inlets looking better now after some jizz on it

(http://i323.photobucket.com/albums/nn458/shako786/20130716_203540_zpsddf2e3df.jpg) (http://s323.photobucket.com/user/shako786/media/20130716_203540_zpsddf2e3df.jpg.html)

Rocker is cris will be dropping them off to the powder coaters tomoz.
Title: Re: silver mk4 1.8t AGU
Post by: gazareth on 16 July 2013, 23:05
hi you could try a couple drops of fairy liquid on the regulator o rings. should just glide in then.
Title: Re: silver mk4 1.8t AGU
Post by: sharki786 on 16 July 2013, 23:26
hi you could try a couple drops of fairy liquid on the regulator o rings. should just glide in then.

Sure it wont f*ck it up?
Title: Re: silver mk4 1.8t AGU
Post by: gazareth on 16 July 2013, 23:32
nah it will be fine. oil or grease isn't good for the o rings but fairy liquid is sound. is it the same reg going back in?
Title: Re: silver mk4 1.8t AGU
Post by: sharki786 on 16 July 2013, 23:36
nah it will be fine. oil or grease isn't good for the o rings but fairy liquid is sound. is it the same reg going back in?

Nice one brother from another mother!
Slipped in nice lol, had to twist it about an all that.

(http://i323.photobucket.com/albums/nn458/shako786/20130716_233925_zps88f3c533.jpg) (http://s323.photobucket.com/user/shako786/media/20130716_233925_zps88f3c533.jpg.html)

Loads of respect on that.
Ye same one gone back in.

Anyone got a forge 007 or 008 dv for sale??
Title: Re: silver mk4 1.8t AGU
Post by: sharki786 on 17 July 2013, 17:54
Went to a local powder coater and spoke to him about the inlet and rocker. As inlet has plastic in the mani for the injectors he advised me to get it anodised. And he will powder coat the rocker but will need to see him tomz.
On the other side went to creations motorsport and got the inlet lower silicone breather and some 3mm silicone for the fuel reg oh yeah
Title: Re: silver mk4 1.8t AGU
Post by: tdi_blu on 17 July 2013, 21:05
Good work so far mate, Naz and Tan at creation have done a fair bit to my wagon good lads there and they have some nice bits and bobs in.What powder coaters have you been to ? I used Bournes done a cracking job on my wheels and seemed far more organised than City.Looking good anyway Sharki  :wink:
Title: Re: silver mk4 1.8t AGU
Post by: sharki786 on 17 July 2013, 21:09
Thanks blu, i went tona place behind my work place as my boss said go to him and mention that your from giligans the form is called hunter powder coaters.
The sale guys are brill but the mechanic is abit of an moody person (lol) he talks to you like your thick. If i need to do any engine work and im not sure il take it to my unc (sandy lane tyre) he tell me what to do (im his trainee) lol

Is bournes op the builders yard (forgot their name)
Title: Re: silver mk4 1.8t AGU
Post by: sharki786 on 30 July 2013, 06:46
Minor update
Went to a breaker in matlock in derby and got a awesome/forge 007 with yellow spring in black.

(http://i323.photobucket.com/albums/nn458/shako786/20130721_225138_HDR_zps40a3e954.jpg) (http://s323.photobucket.com/user/shako786/media/20130721_225138_HDR_zps40a3e954.jpg.html)

This is the guys website, realy top bloke very helpful aswell.

http://www.golfgtiforum.co.uk/index.php?topic=257183.0 (http://www.golfgtiforum.co.uk/index.php?topic=257183.0)

Manifold and rocker are at the polishers will be back end of this week then will get them powder coated. Will update further.
Title: Re: silver mk4 1.8t AGU
Post by: sharki786 on 07 August 2013, 07:27
Took the rocker cover and manifold bolts and nuts to work and had them plated.

Before:
(http://i323.photobucket.com/albums/nn458/shako786/20130805_114242_HDR_zps50bc4038.jpg) (http://s323.photobucket.com/user/shako786/media/20130805_114242_HDR_zps50bc4038.jpg.html)

After:
(http://i323.photobucket.com/albums/nn458/shako786/20130802_121000_zpse69cd3f1.jpg) (http://s323.photobucket.com/user/shako786/media/20130802_121000_zpse69cd3f1.jpg.html)

Got my rocker cover and manifold back, guy did a very good job on it but he couldnt get into the tiny gaps so he gave me the money back. Going to take it to sweeney sherlock powder coaters to get it shot blasted but they closed so just going tonwait till next week now. On the other hand bagged a miltek 2.5" cat back system from 150+ just waiting for him to confirm delivery tomorrow (hopefully)
Now i have a lil dilemma, what colour should i get the rocker and mani done? I got throttle of so thinking black, red or yellow? The guy that i went to does some cool powder coating colours (black pearl base with a nice silver sparkle but you can see the silver chunks in there he also does it in yellow (i think) and red.
Title: Re: silver mk4 1.8t AGU rocker & inlet powder coated
Post by: sharki786 on 16 August 2013, 07:19
got my rocker & mani shot blasted

(http://i323.photobucket.com/albums/nn458/shako786/20130813_150811_zps9ba99288.jpg) (http://s323.photobucket.com/user/shako786/media/20130813_150811_zps9ba99288.jpg.html)

(http://i323.photobucket.com/albums/nn458/shako786/20130813_150818_zps9aff5d6c.jpg) (http://s323.photobucket.com/user/shako786/media/20130813_150818_zps9aff5d6c.jpg.html)

then went to the powder coateds & seen a nice colour

(http://i323.photobucket.com/albums/nn458/shako786/20130815_174949_HDR_zps867020f3.jpg) (http://s323.photobucket.com/user/shako786/media/20130815_174949_HDR_zps867020f3.jpg.html)

with flash:

(http://i323.photobucket.com/albums/nn458/shako786/20130815_175059_zps6aaf9183.jpg) (http://s323.photobucket.com/user/shako786/media/20130815_175059_zps6aaf9183.jpg.html)

(http://i323.photobucket.com/albums/nn458/shako786/20130815_175140_zps710c7c05.jpg) (http://s323.photobucket.com/user/shako786/media/20130815_175140_zps710c7c05.jpg.html)

(http://i323.photobucket.com/albums/nn458/shako786/20130815_175319_zps67734a79.jpg) (http://s323.photobucket.com/user/shako786/media/20130815_175319_zps67734a79.jpg.html)

without flash:
(http://i323.photobucket.com/albums/nn458/shako786/20130815_175511_HDR_zpse914b8e8.jpg) (http://s323.photobucket.com/user/shako786/media/20130815_175511_HDR_zpse914b8e8.jpg.html)

got my free forge 007 upgrade with new seals & piston when i asked if they sold it he said we can send one free of charge. nice going forge!!! :cool:

(http://i323.photobucket.com/albums/nn458/shako786/20130815_175754_HDR_zpsb4a29f78.jpg) (http://s323.photobucket.com/user/shako786/media/20130815_175754_HDR_zpsb4a29f78.jpg.html)
Title: Re: silver mk4 1.8t AGU
Post by: sharki786 on 16 August 2013, 07:42
also got some 18" rs4 wheels not sure if they genuine but what i paid for them i aint fussed. they have some kurb rash:

(http://i323.photobucket.com/albums/nn458/shako786/20130811_075133_zps8bda167e.jpg) (http://s323.photobucket.com/user/shako786/media/20130811_075133_zps8bda167e.jpg.html)

what colour to go with the satin silver?

also will be going to a breaker in matlock in derby to pick up a ko3s (hopefully)
also got some r32 centre console trim
will up load pics
and also got a wing mirror for the poas side as other one has the casing missing :wink:
Title: Re: silver mk4 1.8t AGU
Post by: sharki786 on 16 August 2013, 23:25
Righth then as said before i will upload pics of the alu trim and flush vents.

(http://i323.photobucket.com/albums/nn458/shako786/20130816_230606_LLS_zpse338e180.jpg) (http://s323.photobucket.com/user/shako786/media/20130816_230606_LLS_zpse338e180.jpg.html)

(http://i323.photobucket.com/albums/nn458/shako786/20130816_230642_LLS_zps5c1cee0c.jpg) (http://s323.photobucket.com/user/shako786/media/20130816_230642_LLS_zps5c1cee0c.jpg.html)

Then i remembered the matlock breaker (bill) threw these in
Not bad as they were free :cool:


(http://i323.photobucket.com/albums/nn458/shako786/20130816_231329_LLS_zps4610d053.jpg) (http://s323.photobucket.com/user/shako786/media/20130816_231329_LLS_zps4610d053.jpg.html)

Will be putting these parts on tommorow.
Car battery is dead and tyres are flat.
Title: Re: silver mk4 1.8t AGU
Post by: sharki786 on 20 August 2013, 17:19
Old dv007 piston and seals

(http://i323.photobucket.com/albums/nn458/shako786/20130817_153141_zpsfda05fd2.jpg) (http://s323.photobucket.com/user/shako786/media/20130817_153141_zpsfda05fd2.jpg.html)

Sorry blured pic on the dv. Will get pcv hose kit and a forge tip. (Will creations pcv hose kit be ok?)

(http://i323.photobucket.com/albums/nn458/shako786/20130818_175305_zps28307d44.jpg) (http://s323.photobucket.com/user/shako786/media/20130818_175305_zps28307d44.jpg.html)

And the rocker and mani on.

(http://i323.photobucket.com/albums/nn458/shako786/20130818_175255_zps4dcff3e3.jpg) (http://s323.photobucket.com/user/shako786/media/20130818_175255_zps4dcff3e3.jpg.html)

Sprayed the throttle last night with hammer rite black satin did 3 coats (quickly)
Comments wlecome (nice comments!!) Lol
Title: Re: silver mk4 1.8t AGU
Post by: sharki786 on 22 August 2013, 15:15
Deens new trumpet :grin:

(http://i323.photobucket.com/albums/nn458/shako786/20130822_144929_zps4cc26d73.jpg) (http://s323.photobucket.com/user/shako786/media/20130822_144929_zps4cc26d73.jpg.html)

Ordered yeaterday got it today veru happy with it :cool:

(http://i323.photobucket.com/albums/nn458/shako786/20130822_144952_zpse3340948.jpg) (http://s323.photobucket.com/user/shako786/media/20130822_144952_zpse3340948.jpg.html)

Going matlock this sunday to pick up k03s. Will order a 3" reducer so i can fit the vr6 maf housing and fit my fat s2k green filter. Anyone got any vid of the engine running with the s2k filter on??? Want to hear it being revved :cool:

Changed sparks on it and the unstable idle has disapeared. Will change oil today and oil filter
Title: Re: silver mk4 1.8t AGU
Post by: sharki786 on 25 August 2013, 08:53
Decided to change oil and the filter

(http://i323.photobucket.com/albums/nn458/shako786/20130824_174513_zpsc80c7d82.jpg) (http://s323.photobucket.com/user/shako786/media/20130824_174513_zpsc80c7d82.jpg.html)

(http://i323.photobucket.com/albums/nn458/shako786/20130824_174519_zps76bba4c7.jpg) (http://s323.photobucket.com/user/shako786/media/20130824_174519_zps76bba4c7.jpg.html)

Oil was black and stank of petrol.
Title: Re: silver mk4 1.8t AGU
Post by: sharki786 on 27 August 2013, 15:37
I need a 3" to the forge k03 (s) tip reducer. Which is the best out of these

http://www.ebay.co.uk/sch/i.html?_from=R40&_sacat=0&_nkw=76-51mm+Straight+Reducer+Silicone+Hose&_sop=15[/i]]http://www.ebay.co.uk/sch/i.html?_from=R40&_sacat=0&_nkw=76-51mm+Straight+Reducer+Silicone+Hose&_sop=15 (http://[i)
Title: Re: CONFUSED!! 1.8t AGU
Post by: sharki786 on 20 September 2013, 14:02
So got loads of parts laid around and no time in fitting them. Anyway decided to shift my @$$ and get moving. Started by fitting the bora flush vents. As i fitted them before to my mates gttdi it was easier. Instead of making a loom i extended the wires for the illumination and spliced them into the blue/white and brown wire (same colour as the vents)

(http://i323.photobucket.com/albums/nn458/shako786/20130913_183149_zpscbcd518e.jpg) (http://s323.photobucket.com/user/shako786/media/20130913_183149_zpscbcd518e.jpg.html)

Drivers done

(http://i323.photobucket.com/albums/nn458/shako786/20130913_184103_zps23f442a2.jpg) (http://s323.photobucket.com/user/shako786/media/20130913_184103_zps23f442a2.jpg.html)

Next was the centre i dont have a pic of it fitted as its not pushed in and another reason is because i have climatronic i cant seem to find a gap anywere to feed the wire in for the passengers vent so i have left it out.

Also i  stripped most well all of the bottom part of the dash as i am fitting in a double din

(http://i323.photobucket.com/albums/nn458/shako786/20130918_180303_zps0a6d59be.jpg) (http://s323.photobucket.com/user/shako786/media/20130918_180303_zps0a6d59be.jpg.html)

As you can see i aint bothered fitting it back as im waiting for my mic to arrive for the double din. And also i tried to fit the r32 brush steel inserts around the cage but as i have never taken them off i ended up damaging the tiny clips that hold them into place so whats happening jow is that they are bent so as i have realy good friends, one of them gave me the cage.
Title: Re: CONFUSED!! 1.8t AGU
Post by: sharki786 on 20 September 2013, 14:10
Well got some netpotic handles. As i have the r32 brush steel centre bits i decided to rub 1 down and see how it looks as the previous owner has done the drivers and 1 other handle.

Half way done



(http://i323.photobucket.com/albums/nn458/shako786/20130918_215411_zps32d916f6.jpg) (http://s323.photobucket.com/user/shako786/media/20130918_215411_zps32d916f6.jpg.html)

Finished product (took an hour to do and had grey hands at the end of it all lol)


(http://i323.photobucket.com/albums/nn458/shako786/20130918_223315_zpsbdbab06f.jpg) (http://s323.photobucket.com/user/shako786/media/20130918_223315_zpsbdbab06f.jpg.html)
Car just needs a good vac and a good old wash.
Moore to come

Comments welcome
Title: Re: CONFUSED!! 1.8t AGU
Post by: Diamond Hell on 20 September 2013, 15:15
You're doing a lot of work on things that aren't necessary to a car you bought for the engine.  :grin:
Title: Re: CONFUSED!! 1.8t AGU
Post by: sharki786 on 20 September 2013, 15:21
You're doing a lot of work on things that aren't necessary to a car you bought for the engine.  :grin:

Lols. Was a change in plans. Mistake i know but cars a keeper and will go for a vic check then on the road. The mk3 anni is going into storage and then restored
Title: Re: CONFUSED!! 1.8t AGU
Post by: sharki786 on 20 September 2013, 16:51
Shall i? Or shall i not???

(http://i323.photobucket.com/albums/nn458/shako786/KGrHqRloFDc61RqF3BRKOb1vCtw60_12_zps00010fb6.jpeg) (http://s323.photobucket.com/user/shako786/media/KGrHqRloFDc61RqF3BRKOb1vCtw60_12_zps00010fb6.jpeg.html)

http://www.ebay.co.uk/itm/VW-Golf-Mk4-98-04-Black-R32-look-projector-headlights-inc-fog-lamps-/161099810720?pt=UK_CarsParts_Vehicles_CarParts_SM&fits=Model%3AGolf%7CPlat_Gen%3AMK+IV&hash=item25824c07a0
Title: Re: CONFUSED!! 1.8t AGU
Post by: sharki786 on 26 December 2013, 13:23
so bit of an update.
was thinking about some projector depo lights and dom decided to sell his and i snapped them up.
still sat in the spare room lol
(http://i323.photobucket.com/albums/nn458/shako786/20131226_124912_zps068838f7.jpg) (http://s323.photobucket.com/user/shako786/media/20131226_124912_zps068838f7.jpg.html)


got the new south performance off set pod but not so happy about it as i thought you remove the old top steering column and replace with this but you use some double sided sticky tape and bang it on

(http://i323.photobucket.com/albums/nn458/shako786/20131226_124332_zpsdf42ca43.jpg) (http://s323.photobucket.com/user/shako786/media/20131226_124332_zpsdf42ca43.jpg.html)

(http://i323.photobucket.com/albums/nn458/shako786/20131226_124342_zps2887c245.jpg) (http://s323.photobucket.com/user/shako786/media/20131226_124342_zps2887c245.jpg.html)


also a 6 speed anni gear knob in minto condition

(http://i323.photobucket.com/albums/nn458/shako786/20131226_124207_zpsafe7283c.jpg) (http://s323.photobucket.com/user/shako786/media/20131226_124207_zpsafe7283c.jpg.html)

wanted some smoked hella magic colours rear lights, saw a set on ebay and missed it by a second :cry:
but looked around and found a good condition set for £80 posted
they was sat in the spare room again. and the wife started moaning saying you got all these spares parts and bloody boxes and you aint fitted jack sh1t. so get up off your a$$ and start fitting them or i will dump them outside. so went out last weekend in the bloody cold and started to fit them. the drivers side was a right cnut

before:
(http://i323.photobucket.com/albums/nn458/shako786/20131207_161708_zps6a1e0fc5.jpg) (http://s323.photobucket.com/user/shako786/media/20131207_161708_zps6a1e0fc5.jpg.html)

after:
(http://i323.photobucket.com/albums/nn458/shako786/20131221_151003_zpsab2c4923.jpg) (http://s323.photobucket.com/user/shako786/media/20131221_151003_zpsab2c4923.jpg.html)
(http://i323.photobucket.com/albums/nn458/shako786/20131221_153235_HDR_zpsdbc4f4d3.jpg) (http://s323.photobucket.com/user/shako786/media/20131221_153235_HDR_zpsdbc4f4d3.jpg.html)

then i decided to fit the leater arm rest as my mk4 didnt come with one but wasnt very successful as it didnt come with the clips and the shoulder bolt (speaking with mad4vws atm to see if he has some)
sorry no pic yet

also got a 4mo rear valance but no pic.

got some net optic handles, smooth them down and then ordered some 4D carbon wrap.
(http://i323.photobucket.com/albums/nn458/shako786/20131010_220135_zps492781dd.jpg) (http://s323.photobucket.com/user/shako786/media/20131010_220135_zps492781dd.jpg.html)
(http://i323.photobucket.com/albums/nn458/shako786/20131010_220339_zps971984d5.jpg) (http://s323.photobucket.com/user/shako786/media/20131010_220339_zps971984d5.jpg.html)

also my r32 brush steel surround:
(http://i323.photobucket.com/albums/nn458/shako786/20131221_161834_zps4036f49e.jpg) (http://s323.photobucket.com/user/shako786/media/20131221_161834_zps4036f49e.jpg.html)

vr6 maf:
(http://i323.photobucket.com/albums/nn458/shako786/20131226_124248_HDR_zps21f545ca.jpg) (http://s323.photobucket.com/user/shako786/media/20131226_124248_HDR_zps21f545ca.jpg.html)

more to come when i can be arsed to get out of the house lol
Title: Re: CONFUSED!! 1.8t AGU
Post by: Chris. on 27 December 2013, 01:38
Looking good!  Done a good job cleaning those parts up!

Dont be putting that MAF on without injectors and the turbo to go with it, or itll underfuel.

Stick it on when getting custom mapped.
Title: Re: CONFUSED!! 1.8t AGU
Post by: sharki786 on 27 December 2013, 03:12
Looking good!  Done a good job cleaning those parts up!

Dont be putting that MAF on without injectors and the turbo to go with it, or itll underfuel.

Stick it on when getting custom mapped.

Thanks bud
I was told by wazzer before about fitting the vr maf on. Il fit it when it has been mapped. Dont want anything going bang
Title: Re: CONFUSED!! 1.8t AGU
Post by: sharki786 on 12 February 2014, 22:18
As some know i had brush steel centre consle bits just needed to fit the ashtray in so i took the front console out and i ended up doing this

(http://i323.photobucket.com/albums/nn458/shako786/Mobile%20Uploads/20140210_133113_zpspsi9oqer.jpg) (http://s323.photobucket.com/user/shako786/media/Mobile%20Uploads/20140210_133113_zpspsi9oqer.jpg.html)

(http://i323.photobucket.com/albums/nn458/shako786/Mobile%20Uploads/20140210_133128_zpsudfhyyp6.jpg) (http://s323.photobucket.com/user/shako786/media/Mobile%20Uploads/20140210_133128_zpsudfhyyp6.jpg.html)

looked hard to do but as the misses hair dryer got the wrap soft it just melted into the curves (very naaace)

so was out in the cold yesterday for 3 hrs tried to change the tip with some silicone hoses but got down to the nut and was getting dark so i thought i will leave it. so thought i will fit the boost gauge so got inside the car and i needed a coat hanger to feed the hose into the car so i dropped that. thought i will fit the leather arm rest, looked down and im missing the bloody shoulder bolt, so shut my garage and came home. I fnished work today and straight to the garage and got on with it. I decided to sort the turbo inlet pipe, got to the allen key bolt and was very hard, eventually i got the bolt off without jacking the car up. i had to give the oem tip a good rocking as it wouldnt come off, it then poped off. tried fitting the forge tip but it kept getting stuck so pulled the water pipe that goes to the heater matrix fiddling for ages and then i heard pop it was on :grin:

(http://i323.photobucket.com/albums/nn458/shako786/Mobile%20Uploads/20140211_162048_zpscdcnpdi2.jpg) (http://s323.photobucket.com/user/shako786/media/Mobile%20Uploads/20140211_162048_zpscdcnpdi2.jpg.html)

(http://i323.photobucket.com/albums/nn458/shako786/Mobile%20Uploads/20140212_165902_zpsnwunrxqs.jpg) (http://s323.photobucket.com/user/shako786/media/Mobile%20Uploads/20140212_165902_zpsnwunrxqs.jpg.html)

blower is good, no side to side or in and out movement

(http://i323.photobucket.com/albums/nn458/shako786/Mobile%20Uploads/20140212_165929_zpse6ux6jt8.jpg) (http://s323.photobucket.com/user/shako786/media/Mobile%20Uploads/20140212_165929_zpse6ux6jt8.jpg.html)

side to side with the forge

(http://i323.photobucket.com/albums/nn458/shako786/Mobile%20Uploads/20140212_170518_zpsqdqtsiee.jpg) (http://s323.photobucket.com/user/shako786/media/Mobile%20Uploads/20140212_170518_zpsqdqtsiee.jpg.html)

(http://i323.photobucket.com/albums/nn458/shako786/Mobile%20Uploads/20140212_170005_zps824tjdva.jpg) (http://s323.photobucket.com/user/shako786/media/Mobile%20Uploads/20140212_170005_zps824tjdva.jpg.html)

(http://i323.photobucket.com/albums/nn458/shako786/Mobile%20Uploads/20140212_170009_zpsanfv46jn.jpg) (http://s323.photobucket.com/user/shako786/media/Mobile%20Uploads/20140212_170009_zpsanfv46jn.jpg.html)

random engine shots after fitting the sillicone hoses

(http://i323.photobucket.com/albums/nn458/shako786/Mobile%20Uploads/20140212_182541_zps6umtkq7p.jpg) (http://s323.photobucket.com/user/shako786/media/Mobile%20Uploads/20140212_182541_zps6umtkq7p.jpg.html)

(http://i323.photobucket.com/albums/nn458/shako786/Mobile%20Uploads/20140212_182547_zpsymr9fsxc.jpg) (http://s323.photobucket.com/user/shako786/media/Mobile%20Uploads/20140212_182547_zpsymr9fsxc.jpg.html)

(http://i323.photobucket.com/albums/nn458/shako786/Mobile%20Uploads/20140212_182551_zpsgjlf9mkw.jpg) (http://s323.photobucket.com/user/shako786/media/Mobile%20Uploads/20140212_182551_zpsgjlf9mkw.jpg.html)

(http://i323.photobucket.com/albums/nn458/shako786/Mobile%20Uploads/20140212_182553_zpsjae984fu.jpg) (http://s323.photobucket.com/user/shako786/media/Mobile%20Uploads/20140212_182553_zpsjae984fu.jpg.html)

close up of the dv, it has the yellow spring in it but i have ordered a green one from forge so will be fitting that in tomorrow (hopefully)

(http://i323.photobucket.com/albums/nn458/shako786/Mobile%20Uploads/20140212_182600_zpscn5icjgq.jpg) (http://s323.photobucket.com/user/shako786/media/Mobile%20Uploads/20140212_182600_zpscn5icjgq.jpg.html)

air box back on but i have ordered a reducer for the s2k filter so when that arrives i will be fitting that in too

(http://i323.photobucket.com/albums/nn458/shako786/Mobile%20Uploads/20140212_182606_zpsvlkhsucr.jpg) (http://s323.photobucket.com/user/shako786/media/Mobile%20Uploads/20140212_182606_zpsvlkhsucr.jpg.html)

(http://i323.photobucket.com/albums/nn458/shako786/Mobile%20Uploads/20140212_182609_zpssrgvkxsv.jpg) (http://s323.photobucket.com/user/shako786/media/Mobile%20Uploads/20140212_182609_zpssrgvkxsv.jpg.html)

my hella magic colours

(http://i323.photobucket.com/albums/nn458/shako786/Mobile%20Uploads/20140212_182729_zpsteky4z0o.jpg) (http://s323.photobucket.com/user/shako786/media/Mobile%20Uploads/20140212_182729_zpsteky4z0o.jpg.html)

(http://i323.photobucket.com/albums/nn458/shako786/Mobile%20Uploads/20140212_182655_zpsr3bnfzun.jpg) (http://s323.photobucket.com/user/shako786/media/Mobile%20Uploads/20140212_182655_zpsr3bnfzun.jpg.html)

(http://i323.photobucket.com/albums/nn458/shako786/Mobile%20Uploads/20140212_182733_zpssfvw19ex.jpg) (http://s323.photobucket.com/user/shako786/media/Mobile%20Uploads/20140212_182733_zpssfvw19ex.jpg.html)

after fitting the forge tip i decided to have a look and see if there was any difference well there is, Now i can hear the dv better than before. Also when i launched off it wheel spun very easily.

thats all folks for now.

p.s my reverse lights are not working, anyone know which fuse it could be?
Title: Re: CONFUSED!! 1.8t AGU
Post by: dom on 12 February 2014, 23:06
That centre console looks interesting :afro:

What did you wrap it with? You fitted it yet?
Title: Re: CONFUSED!! 1.8t AGU
Post by: QazGolf on 12 February 2014, 23:11
Great build man, might need your help on my car soon sharki haha
keep it up man  :grin:
Title: Re: CONFUSED!! 1.8t AGU
Post by: sharki786 on 13 February 2014, 04:42
That centre console looks interesting :afro:

What did you wrap it with? You fitted it yet?

Cheers dom. I used some 4d carbon wrap i got of the bay. Its just pushed in not screwed in or anything.
Title: Re: CONFUSED!! 1.8t AGU
Post by: sharki786 on 13 February 2014, 04:43
Great build man, might need your help on my car soon sharki haha
keep it up man  :grin:

Thanks bro.
Hehe y not. If i can i will help you.
Title: Re: CONFUSED!! 1.8t AGU
Post by: sharki786 on 13 February 2014, 12:46
Got my green spring from forge today morning. Will fit later today and test it out.

(http://i323.photobucket.com/albums/nn458/shako786/Mobile%20Uploads/2014-02-13%2012.50.30_zps0ngfkyh8.png) (http://s323.photobucket.com/user/shako786/media/Mobile%20Uploads/2014-02-13%2012.50.30_zps0ngfkyh8.png.html)

(http://i323.photobucket.com/albums/nn458/shako786/Mobile%20Uploads/2014-02-13%2012.51.06_zpsnf0bwhc7.png) (http://s323.photobucket.com/user/shako786/media/Mobile%20Uploads/2014-02-13%2012.51.06_zpsnf0bwhc7.png.html)

Had to order a rear cup holder as mine is broken and then i will bolt the arm rest in.
But today i will try and fit the green spring and voost gauge lol
Title: Re: CONFUSED!! 1.8t AGU
Post by: sharki786 on 13 February 2014, 21:40
Test fitted my newsouth performance gauge, i fed the sillicone hose behind the air box where the loom goes into. It sits just at 18 psi.
(http://i323.photobucket.com/albums/nn458/shako786/Mobile%20Uploads/20140213_161317_zps7gohwhjf.jpg) (http://s323.photobucket.com/user/shako786/media/Mobile%20Uploads/20140213_161317_zps7gohwhjf.jpg.html)

A quick vid of it working
(http://i323.photobucket.com/albums/nn458/shako786/Mobile%20Uploads/th_20140213_161339_zps3o8ykgbe.jpg) (http://i323.photobucket.com/albums/nn458/shako786/Mobile%20Uploads/20140213_161339_zps3o8ykgbe.mp4)

My aero R32 wipers arrived

(http://i323.photobucket.com/albums/nn458/shako786/Mobile%20Uploads/20140213_212454_zpsiboylr6c.jpg) (http://s323.photobucket.com/user/shako786/media/Mobile%20Uploads/20140213_212454_zpsiboylr6c.jpg.html)

(http://i323.photobucket.com/albums/nn458/shako786/Mobile%20Uploads/20140213_212450_zpsox4nrujp.jpg) (http://s323.photobucket.com/user/shako786/media/Mobile%20Uploads/20140213_212450_zpsox4nrujp.jpg.html)

Half fitted the arm rest as it was getting dark.
Hopefully will complete the gauge tomorrow
Title: Re: CONFUSED!! 1.8t AGU
Post by: sharki786 on 13 February 2014, 21:55
Also fitted the green spring in the dv. Cant tell much difference as the car can not be driven on the road yet.
Title: Re: CONFUSED!! 1.8t AGU
Post by: sharki786 on 14 February 2014, 15:14
Another 2 parcels arrived :grin:

(http://i323.photobucket.com/albums/nn458/shako786/Mobile%20Uploads/20140214_151502_zpsvdkzred7.jpg) (http://s323.photobucket.com/user/shako786/media/Mobile%20Uploads/20140214_151502_zpsvdkzred7.jpg.html)

Will fit today with the s2k filter and see if there is any difference in noise.

Still have the "miltek" exhaust, rear 4mo valance and doms projector loits to fit aswell.
Oh and the pancake pipe replacement to a ths one.
Title: Re: CONFUSED!! 1.8t AGU
Post by: Wazzzer on 14 February 2014, 17:31
Can you give me a link of the seller you bought the vinyl from please mate? Want to see if they do matt black...
Title: Re: CONFUSED!! 1.8t AGU
Post by: sharki786 on 14 February 2014, 18:53
Can you give me a link of the seller you bought the vinyl from please mate? Want to see if they do matt black...

Wazzer i cant find it. I can only see upto 60 days on my ebay. Sorry mate. I also would say its not all that as im getting bubbles.
Title: Re: CONFUSED!! 1.8t AGU
Post by: sharki786 on 14 February 2014, 18:55
I would buy this. You know 3m is good sheet :laugh:

http://www.ebay.co.uk/sch/i.html?_odkw=matt+black+4d+wrap&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.X3m+matt+black+wrap&_nkw=3m+matt+black+wrap&_sacat=0
Title: Re: CONFUSED!! 1.8t AGU
Post by: Wazzzer on 14 February 2014, 19:03
Nice one cheers
Title: Re: CONFUSED!! 1.8t AGU
Post by: sharki786 on 14 February 2014, 19:30
Nice one cheers

No worries wazzer.
Title: Re: CONFUSED!! 1.8t AGU
Post by: sharki786 on 14 February 2014, 19:43
Fitted the filter in the pouring rain :grin: The induction noise sounds normal but the dv is louder and you can hear it from the filter lol

(http://i323.photobucket.com/albums/nn458/shako786/Mobile%20Uploads/20140214_172551_zpswhvdyozk.jpg) (http://s323.photobucket.com/user/shako786/media/Mobile%20Uploads/20140214_172551_zpswhvdyozk.jpg.html)

(http://i323.photobucket.com/albums/nn458/shako786/Mobile%20Uploads/20140214_172547_zpslwtfzmld.jpg) (http://s323.photobucket.com/user/shako786/media/Mobile%20Uploads/20140214_172547_zpslwtfzmld.jpg.html)

(http://i323.photobucket.com/albums/nn458/shako786/Mobile%20Uploads/20140214_172540_zpsxo5uypqp.jpg) (http://s323.photobucket.com/user/shako786/media/Mobile%20Uploads/20140214_172540_zpsxo5uypqp.jpg.html)

(http://i323.photobucket.com/albums/nn458/shako786/Mobile%20Uploads/20140214_172535_zpsvnhko52s.jpg) (http://s323.photobucket.com/user/shako786/media/Mobile%20Uploads/20140214_172535_zpsvnhko52s.jpg.html)

Tried to fit the boost gauge but i needed a long posi screw driver to take the colum off. So i lave left it for now.
Sounds good though :cool:
Title: Re: CONFUSED!! 1.8t AGU
Post by: sharki786 on 21 March 2014, 21:08
Few updates but needs pics. Fitted arm rest, fitted boost gauge. New massive fmic on its way from bbt, but i need some 2.5" piping all the way so speaking to someone who sells ash hoses on egay. Also got a supersize r-tech tip to go on. Only down fall is that its black and not blue but minor, got some hi grip hose clamps on their way aswel for it as the other clips i have are bogus and i know i will need to replace them so why not now. The forge tip will be going on for sale as soon as i fit the ss tip in. Its in mint condition as its just been fitted and car has only been started every so often. The car needs a good damn clean inside and out. But as the car aint insured or anything i dont want to risk parking it on the road.

pics to follow
Title: Re: CONFUSED!! 1.8t AGU
Post by: sharki786 on 21 January 2018, 15:15
Long time since iv updated. Car has been on the road and the vr6 anni swapped places with it. Well a lot has happened since then. Car has been lowered onto AP's
Ram air filter
R-tec over size tip (not 3" maf)
A hybrid core for my k03s (needs fitting)
Miltek exhaust
Euro look depo projection headlights with LED bulbs
VRs calipers all around (need to be fitted)
2.5" fmic pipework
Hmm i cant think of anything else
Oh yes.
Red top saab injectors (need fitting)
& Finaly need a new fuel pump.
Title: Re: CONFUSED!! 1.8t AGU
Post by: sharki786 on 21 January 2018, 15:18
(http://i323.photobucket.com/albums/nn458/shako786/IMG_20171224_220411_zpsyyhq8aic.jpg) (http://s323.photobucket.com/user/shako786/media/IMG_20171224_220411_zpsyyhq8aic.jpg.html)
Title: Re: CONFUSED!! 1.8t AGU
Post by: sharki786 on 21 January 2018, 15:21
Just testing photo bucket. But that the hybrid core stage 2 cost me £240inc del so couldnt knock it.
Also had my anni front splitter painted (done my self)
Will update more pics ina bit.
Title: Re: CONFUSED!! 1.8t AGU
Post by: sharki786 on 21 January 2018, 15:54
(http://i323.photobucket.com/albums/nn458/shako786/Mobile%20Uploads/IMG_20170301_122232_zpsuwggmqog.jpg) (http://s323.photobucket.com/user/shako786/media/Mobile%20Uploads/IMG_20170301_122232_zpsuwggmqog.jpg.html)

(http://i323.photobucket.com/albums/nn458/shako786/Mobile%20Uploads/IMG_20170301_122237_zps1zpdgotd.jpg) (http://s323.photobucket.com/user/shako786/media/Mobile%20Uploads/IMG_20170301_122237_zps1zpdgotd.jpg.html)
Miltek exhaust

(http://i323.photobucket.com/albums/nn458/shako786/Mobile%20Uploads/IMG_20170507_191102_zpsn6ow7hjm.jpg) (http://s323.photobucket.com/user/shako786/media/Mobile%20Uploads/IMG_20170507_191102_zpsn6ow7hjm.jpg.html)
Power acustic tweeter upgrade all around

(http://i323.photobucket.com/albums/nn458/shako786/Mobile%20Uploads/FB_IMG_1494181882050_zpsecopudmv.jpg) (http://s323.photobucket.com/user/shako786/media/Mobile%20Uploads/FB_IMG_1494181882050_zpsecopudmv.jpg.html)
Ready for plastic soldering

(http://i323.photobucket.com/albums/nn458/shako786/Mobile%20Uploads/IMG_20170414_173340_zpshcocfujd.jpg) (http://s323.photobucket.com/user/shako786/media/Mobile%20Uploads/IMG_20170414_173340_zpshcocfujd.jpg.html)

(http://i323.photobucket.com/albums/nn458/shako786/Mobile%20Uploads/FB_IMG_1494181917195_zpsmzbxesdc.jpg) (http://s323.photobucket.com/user/shako786/media/Mobile%20Uploads/FB_IMG_1494181917195_zpsmzbxesdc.jpg.html)
Original connector done properly

(http://i323.photobucket.com/albums/nn458/shako786/Mobile%20Uploads/IMG_20170507_191102_zpsn6ow7hjm.jpg) (http://s323.photobucket.com/user/shako786/media/Mobile%20Uploads/IMG_20170507_191102_zpsn6ow7hjm.jpg.html)
(http://i323.photobucket.com/albums/nn458/shako786/Mobile%20Uploads/IMG_20170707_203131_zpsqq2lnfvj.jpg) (http://s323.photobucket.com/user/shako786/media/Mobile%20Uploads/IMG_20170707_203131_zpsqq2lnfvj.jpg.html)

VRs caliper upgrade.
Changed colour to red
Just 1 more to build back up

(http://i323.photobucket.com/albums/nn458/shako786/Mobile%20Uploads/IMG_20170707_190922_zps4m7nuhek.jpg) (http://s323.photobucket.com/user/shako786/media/Mobile%20Uploads/IMG_20170707_190922_zps4m7nuhek.jpg.html)
Bigredd seal kit

(http://i323.photobucket.com/albums/nn458/shako786/Mobile%20Uploads/IMG_20171224_223755_zpsjsyv7i1b.jpg) (http://s323.photobucket.com/user/shako786/media/Mobile%20Uploads/IMG_20171224_223755_zpsjsyv7i1b.jpg.html)
Turbo ready to go on. Got a full genuine seal kit as im working at TPS

(http://i323.photobucket.com/albums/nn458/shako786/Mobile%20Uploads/IMG_20170423_181716_zpscsw9czrq.jpg) (http://s323.photobucket.com/user/shako786/media/Mobile%20Uploads/IMG_20170423_181716_zpscsw9czrq.jpg.html)
AP's going on ROADSIDE BREW. My uncle on it again as always.

(http://i323.photobucket.com/albums/nn458/shako786/Mobile%20Uploads/IMG_20170507_190752_zpslqphcfxh.jpg) (http://s323.photobucket.com/user/shako786/media/Mobile%20Uploads/IMG_20170507_190752_zpslqphcfxh.jpg.html)
After fitting the rear coilovers outside my place.

(http://i323.photobucket.com/albums/nn458/shako786/Mobile%20Uploads/IMG_20171022_140206_zpsvtieqtxe.jpg) (http://s323.photobucket.com/user/shako786/media/Mobile%20Uploads/IMG_20171022_140206_zpsvtieqtxe.jpg.html)
Euro moded projectors and anni front splitter painted by me.
Oh ye had some carbon gel plates made up by 1 of my custmers.
More to come.

Title: Re: CONFUSED!! 1.8t AGU
Post by: sharki786 on 21 January 2018, 15:58
Also have a rear 4mo valance to get smooth and sprayed same colour as car.

Also replaced 3 door locks as they was funky.
Just have the boot lock to fit.
Also got LED rear number plate lights fitted.
Title: Re: CONFUSED!! 1.8t AGU
Post by: QazGolf on 21 January 2018, 20:55
Keep it up bro! Looking forward to how much power you make.

Qaz
Title: Re: CONFUSED!! 1.8t AGU
Post by: sharki786 on 21 January 2018, 23:33
Shame pics aint working for me now :undecided:
Title: Re: CONFUSED!! 1.8t AGU
Post by: Wazzzer on 22 January 2018, 23:10
They work fine for me :wink:
Title: Re: CONFUSED!! 1.8t AGU
Post by: QazGolf on 26 January 2018, 19:41
Dude make an account with Imgur.com and its simple to upload them. Drag and drop them onto the box and then just find the forum link and copy and paste it!
Title: Re: CONFUSED!! 1.8t AGU
Post by: sharki786 on 28 January 2018, 20:03
sh!ty update.
Sliced me hand :laugh:
Decided to tackle the hand brake lines as os was sticking. Got that side done then decided with the ns, oh great. Mofo was stuck, kids running around wild. So had to keep an eye on them at same time. I lost patience and yanked the c*nt and the metal guide pipe flew out. So after fighting with it to get the broken plastic bit out gave in and put the car back together. Will order a new guide pipe toms when im back at work.
Title: Re: CONFUSED!! 1.8t AGU
Post by: sharki786 on 13 February 2018, 20:44
So hand brake is all sweet, 2clicks and the rock solid. Now need to do a brake fluid change. Being the beautiful weather on the weekend, i was cleaning the car so snowfoam etc and it starts to snow. Lols nice. After my finger tips falling off i finish up cleaning the car. So come this weekend i will try to do the brake fluid change. Nothing new...
Title: Re: CONFUSED!! 1.8t AGU
Post by: sharki786 on 11 April 2018, 19:45
So brake fluid has been changed without a hitch. Also deceided to fit the hybrid stage 2 turbo on. All went well till last stud on head for manifold decided to snap. Then as the car was jacked up funny it wouldnt start. After head scratching a friend of mine told me that its fuel related. So after cranking it the battery died. Had to leave it as is as i had to get to work. So a full week went by and then weekend came with a fully charged battery. Cranked it and still same. Checked fuel and it was good. So i realised i didnt have enough fuel pressure so gave it longer cranks and it coughed into life. So have done 300+ miles on it running without the n75. Drove to bradistan and back and drove nice. So i need to fit the fmic and get it mapped.
Title: Re: CONFUSED!! 1.8t AGU
Post by: sharki786 on 11 April 2018, 20:00
(http://i323.photobucket.com/albums/nn458/shako786/IMG-20180330-WA0005_zpsj1s6odzn.jpeg) (http://s323.photobucket.com/user/shako786/media/IMG-20180330-WA0005_zpsj1s6odzn.jpeg.html)
Road side again

(http://i323.photobucket.com/albums/nn458/shako786/IMG_20180301_201307_zps7xxn1vir.jpg) (http://s323.photobucket.com/user/shako786/media/IMG_20180301_201307_zps7xxn1vir.jpg.html)
Not much pics realy
Title: Re: CONFUSED!! 1.8t AGU
Post by: QazGolf on 23 April 2018, 21:54
Get it mapped bro interested in what this makes, also bro we need to make your pics work!
Title: Re: CONFUSED!! 1.8t AGU
Post by: sharki786 on 19 June 2018, 21:59
Get it mapped bro interested in what this makes, also bro we need to make your pics work!

Qaz brooooo. the pics are working fine for me.
Need to do cam belt & WP then fit the vr6 sachs clutch thats waiting then i can fit the fmic and then fit the saab red top injectors.

Did a small update. Alarm keep locking the doors when i open the boot (basicly its not recognising the boot open) got a repair plug and wires from work and built it up. Now the boot compartment light works but the alarm dont chirp. Iv seen another 2 pin plug and that has suppose to have a micro swich connected to it like below

(http://i323.photobucket.com/albums/nn458/shako786/s-l1600_zpsjqmxgzp8.jpg) (http://s323.photobucket.com/user/shako786/media/s-l1600_zpsjqmxgzp8.jpg.html)


This is were the 2 pin plug is:

(http://i323.photobucket.com/albums/nn458/shako786/IMG_20180619_215515_zpsk1fs4kaq.jpg) (http://s323.photobucket.com/user/shako786/media/IMG_20180619_215515_zpsk1fs4kaq.jpg.html)

But were is the microswitch mounted?
The boot lock is new and the wires are insulated for temp till i solder them.
Now if i diconnect the 3 pin plug from the boot lock the alarn will chirp when i press the close button. But if i connect it i get no chirp only when i unlock it.
Title: Re: CONFUSED!! 1.8t AGU
Post by: QazGolf on 30 June 2018, 15:36
Yes bro get a move on with it need to see what power this hybrid makes!