Author Topic: Who's put a Stage 1 on a Clubsport?  (Read 2376 times)

Offline rwleigh

  • Not said much yet
  • **
  • Posts: 57
  • Location: Lincolnshire.
  • Richard.
    • Richard Leigh Photography
Re: Who's put a Stage 1 on a Clubsport?
« Reply #30 on: 27 September 2017, 23:28 »
I've not personally but a guy at my work has apr stage 1 software with r600 intake and he got 385bhp

Cool, so I'm not the only one then... Obviously I knew that just wondering how many admitted it...

May I ask, manual or DSG?
Golf GTI CS #10 | Manual | 5 door |  Pure White | Brescia 19's | Car-Net | 90% tints | Winter Pack

Offline scanesare

  • Here all the time
  • ****
  • Posts: 330
  • Location: Flat with straights
  • GTI Clubsport
Re: Who's put a Stage 1 on a Clubsport?
« Reply #31 on: 12 October 2017, 14:00 »
I've not personally but a guy at my work has apr stage 1 software with r600 intake and he got 385bhp

Cool, so I'm not the only one then... Obviously I knew that just wondering how many admitted it...

May I ask, manual or DSG?


Rwleigh, couple of questions: 1) Did you have the over-boost function deleted or not? 2) Have you done any data-logging of the remap? Wanting to cross-check some mixture values vs a full remap like REVO.

Offline Exonian

  • Forum addict
  • *
  • Posts: 5,451
  • Location: Down and to the left quite a bit
Re: Who's put a Stage 1 on a Clubsport?
« Reply #32 on: 12 October 2017, 16:39 »
scanesare, are you running your JB1 with the default 4.8 Map 1 setting or have you upped it to 5?
GTI Ed40 Clubsport

Offline scanesare

  • Here all the time
  • ****
  • Posts: 330
  • Location: Flat with straights
  • GTI Clubsport
Re: Who's put a Stage 1 on a Clubsport?
« Reply #33 on: 12 October 2017, 20:04 »
scanesare, are you running your JB1 with the default 4.8 Map 1 setting or have you upped it to 5?

I have now switched to JB4 where Map 1 is +4 psi and Map 2 +5.6 psi but I am trying to set up Map 6 that works on absolute boost and completely bypasses over-boost. However it seems it's a bit complicated.

Offline TurboTrev

  • Here all the time
  • ****
  • Posts: 316
  • Location: Co Durham
Re: Who's put a Stage 1 on a Clubsport?
« Reply #34 on: 12 October 2017, 20:50 »
scanesare, are you running your JB1 with the default 4.8 Map 1 setting or have you upped it to 5?

I have now switched to JB4 where Map 1 is +4 psi and Map 2 +5.6 psi but I am trying to set up Map 6 that works on absolute boost and completely bypasses over-boost. However it seems it's a bit complicated.

Have you asked for a step by step instruction from George at Burgersport?  He really helpful when members ask questions on the R Forum.

Offline scanesare

  • Here all the time
  • ****
  • Posts: 330
  • Location: Flat with straights
  • GTI Clubsport
Re: Who's put a Stage 1 on a Clubsport?
« Reply #35 on: 13 October 2017, 09:13 »
scanesare, are you running your JB1 with the default 4.8 Map 1 setting or have you upped it to 5?

I have now switched to JB4 where Map 1 is +4 psi and Map 2 +5.6 psi but I am trying to set up Map 6 that works on absolute boost and completely bypasses over-boost. However it seems it's a bit complicated.

Have you asked for a step by step instruction from George at Burgersport?  He really helpful when members ask questions on the R Forum.

Yep, we've been working together on this but still not satisfied with the values I get in Map 6 and wanted to compare with a remap.

Offline rwleigh

  • Not said much yet
  • **
  • Posts: 57
  • Location: Lincolnshire.
  • Richard.
    • Richard Leigh Photography
Re: Who's put a Stage 1 on a Clubsport?
« Reply #36 on: 13 October 2017, 12:37 »
Rwleigh, couple of questions: 1) Did you have the over-boost function deleted or not? 2) Have you done any data-logging of the remap? Wanting to cross-check some mixture values vs a full remap like REVO.

1) As far as I know there is no over-boost with the REVO map just whichever setting I choose with my SPS from stock 265bhp to 345bhp and 370bhp, depending on fuel used.

2) No but I'd be very interested to know how and what with to assist you if I can?
Golf GTI CS #10 | Manual | 5 door |  Pure White | Brescia 19's | Car-Net | 90% tints | Winter Pack

Offline scanesare

  • Here all the time
  • ****
  • Posts: 330
  • Location: Flat with straights
  • GTI Clubsport
Re: Who's put a Stage 1 on a Clubsport?
« Reply #37 on: 13 October 2017, 13:15 »
Rwleigh, couple of questions: 1) Did you have the over-boost function deleted or not? 2) Have you done any data-logging of the remap? Wanting to cross-check some mixture values vs a full remap like REVO.

1) As far as I know there is no over-boost with the REVO map just whichever setting I choose with my SPS from stock 265bhp to 345bhp and 370bhp, depending on fuel used.

2) No but I'd be very interested to know how and what with to assist you if I can?

Good that the over-boost is gone, it's only complicating things esp. when you tune. Well, if you have any sort of data logging equipment (VCDS or JB4 (you probably don't need that  :smiley:) or OBDEleven although not sure how easy it is to data log with OBDEleven) it could be all that I need. A couple of pulls in 3rd and 4th gear logged, so that I can compare values and see what happens in other tunes.

Offline rwleigh

  • Not said much yet
  • **
  • Posts: 57
  • Location: Lincolnshire.
  • Richard.
    • Richard Leigh Photography
Re: Who's put a Stage 1 on a Clubsport?
« Reply #38 on: 13 October 2017, 13:30 »

Good that the over-boost is gone, it's only complicating things esp. when you tune. Well, if you have any sort of data logging equipment (VCDS or JB4 (you probably don't need that  :smiley:) or OBDEleven although not sure how easy it is to data log with OBDEleven) it could be all that I need. A couple of pulls in 3rd and 4th gear logged, so that I can compare values and see what happens in other tunes.

An OBDeleven I do have, never done data  logging with it but I assume this is what you need?

https://youtu.be/w818pgcE1-0
Golf GTI CS #10 | Manual | 5 door |  Pure White | Brescia 19's | Car-Net | 90% tints | Winter Pack

Offline scanesare

  • Here all the time
  • ****
  • Posts: 330
  • Location: Flat with straights
  • GTI Clubsport
Re: Who's put a Stage 1 on a Clubsport?
« Reply #39 on: 13 October 2017, 14:30 »

Good that the over-boost is gone, it's only complicating things esp. when you tune. Well, if you have any sort of data logging equipment (VCDS or JB4 (you probably don't need that  :smiley:) or OBDEleven although not sure how easy it is to data log with OBDEleven) it could be all that I need. A couple of pulls in 3rd and 4th gear logged, so that I can compare values and see what happens in other tunes.

An OBDeleven I do have, never done data  logging with it but I assume this is what you need?

https://youtu.be/w818pgcE1-0


Yes I had seen that video but I'm not sure it's enough to figure out all the values one would like to log. For starters, he directly enters some channels that correspond to actual/requested boost but what about the rest of the values? I see no mention of how you can log other stuff (unless it's easy to google them).

For my case I'm mostly interested in the AFR and Boost values. Doing a pull in 3rd gear from 2K down all the way up to the end of 3rd gear and into 4th would be a good place to start from as I want to see what AFRs REVO runs in this car.

If you feel like trying to log those then you are absolutely welcome and would be doing me a great favor in fact.  :wink: