just started on mounting the rear diff and axle
prop too short lol so ill soon sort that little joby out,,
not mutch to add untill i sort some steel 2moz ,,
started to weld nuts in for rear mounts and decided i wont it lower ,stress lol ,ill re sort this 2moz
only had a a bit of time as it were getting dark so made a quick restart on the short runner ,had to angle the box for the air flow ,which one day may be runing
and found a stronger coilpack pack for better spark gaps 40,ooo ,instead of my 10,ooo one ,rough idea of how it will be wired lol
quick zip around for intake holes
propshaft in
bit of welding just mount the axle
thought best beef the front up more ,we dont wont it dropping off now do we lol
bolted up
ive made this basic frame ,so i can move the rear axle in place were i need to weld ,so it will be sat approx 2.5 backwards shown in pic ,,then ill cut the prop to exstend it ,due to it been to short ,and be sorted afterwards
diff just about bolted up
,,,
had to cut the track arms and a trail fit to get the rear wheel straight
then trail fit the wheel as u can see its not central this is because the propshaft too too short at the mo ,
then u can see the main rear hub mount is hitting the inner sill ,a bit of chopping welding here and there ill sort that
got a dam grinding lump in eye this after lol so that knackerd progress up 2day
but managed to weld the rear track control arms up and fit them
so might as well fit the clutch pedal assemby 2moz
right thats the tempory fit of the axle to keep it held in place while i algine a few more bits
started on the rear arm mounting this after
ive a few more strenghing bits in side the mount to add before i start welding,,,
more welding up this after
then started on the spring mount
then stress happernd ,due to wear i amounted the rear subframe i carnt lower the dam wheel enoegh ,grr ,ill have to do some chopping 2moz make the buggar a bit lower
bit more modifying 2day,,
made a rear damper mount ,,,
and saved on buying new dampers just just the oringle mk4 ones at a similar angle
lets say that buggars isnt moveing any were soon
damper angle ,gas dampers so should work well,,
slightly got the wheel down a fraction ,as i had to allow for cv movement as well as spring and arm movement,,
and fitted a mk4 passat hydrolic pedal for the clutch to work
and ive decied evern thow ive made the rear arms im going to use smaller box ,so then ill have a little more clearance between the spring and arm and also the rear subframe,,