GolfGTIforum.co.uk
General => General discussion => Topic started by: clipperjay on 31 August 2013, 18:21
-
Well I was given another Xbox 360 :lipsrsealed: No rings of death just thinks all games old and new are dirty, and cannot read the data was thinking just blow it with some compressed air or anyone know of a decent link to optical disc cleaners?
Not sure if its a Tosh or Sam drive need to break it open to find out.
-
Have you tried the toothpaste method? :grin:
I did, once. :grin:
You can get a read error when the laser is stuck because the rack it runs on is clogged with fluff. Break it open and give the guides a grease. Worked for me.
-
I'll give it a shot mate, :smiley: read something about plastic dust from the inside crumbles on to the laser?
Will clean it up before replacing the drive though.
-
Well just to let people know if the DVD drive is broken i.e laser is foobared then its no point in buying a new drive apparently the DVD drive and mother boards are linked via software and codes. The only solution to this was buying a new laser hop!
Cost £7.00 of egay one hour of my labour taking apart, cleaning, de-solidering static point, re-greasing and some superglue on crappy cheap screws on plastic it works perfect now and its got an HDMI port on this one too! :tongue:
-
Good to know mate :afro:
-
Get a new laser off ebay ,only cheap and easy to replace. You need to know what dvd drive you have by removing the face plate and look in a hole for a wire it will be red or white or yellow and that will tell you witch one you have ,if i can find the guild i was looking at few days ago.. ill add link here...
http://www.llamma.com/xbox360/Xbox_360_DVD_Drive_Comparison.htm
They have missed one drive thats in the late 2008-2009 console ,it has a yellow wire in the hole and is a light-on drive.