Author Topic: tyler - Corrado 16v  (Read 8530 times)

Offline jv

  • Administrator
  • Serious forum addict
  • *****
  • Posts: 7,212
tyler - Corrado 16v
« on: 14 September 2009, 20:00 »
:)
Buy site stuff!
GolfGTI.co.uk - merchandise

Support the forum charity!
Forum Charity

Offline tyler

  • GTI forum regular
  • ***
  • Posts: 118
Re: tyler - Corrado 16v
« Reply #1 on: 15 September 2009, 08:05 »
thanks jv  :smiley:



mk1 golf long gone  :sad:but now after having several cars since the mk1 including a couple of mk2 and a mk3 seriously lost the passion for doing anything with the mk3 and just used as a family car.


ive now bought a corrado well a few months back

its in pretty good condition for the age (20 yrs old now) and for 500 i couldnt moan since the i have done a few mods

first was to get the car back to red instead of the pink it arrived in
then sort the rust out on the back
fitted coilovers and swapped the 90mm spoiler for a 50mm less scrapeing over speed humps
i ten fitted new rear lights and wheels new front grill ect i also bought some bling for the engine  :smiley:









but recently stripped the interior and wax oiled the inside took the dash out and will be getting it flocked bought new seats cobra sidewinders  :D  and starrted to line up the stereo system new fan fitted the biggest i could get in (16") and  mounted on the front instead off the rear

new fan location its very tight


Amp  location just beyond the seats Old skool amps and crossover by alpine


corrado 16v lowered,leather,grill,oz route,m3 lights polished engine,
mk1 golf cabby not alot done but in primer

Offline tyler

  • GTI forum regular
  • ***
  • Posts: 118
Re: tyler - Corrado 16v
« Reply #2 on: 15 September 2009, 08:06 »
Dash out ready for flocking



worring bit hopefully it will go back in lol

more work done started the false floor




new seats there need lowering a couple off inches but tested for fitment harnessess turned up




ive now bought a vr6 engine as well this will be stripped and rebuilt with the intentions of a turbo or supercharger  :smiley:
corrado 16v lowered,leather,grill,oz route,m3 lights polished engine,
mk1 golf cabby not alot done but in primer

Offline tyler

  • GTI forum regular
  • ***
  • Posts: 118
Re: tyler - Corrado 16v
« Reply #3 on: 24 September 2009, 19:29 »
lowered the subframes a little bit as the mk2 golf ones are higher than the rado ones so knocked a inch off alround hopefully this will be enough to sit right. bought a manifold to run carbs cant decide between 40s and 45s dash finally sent off
corrado 16v lowered,leather,grill,oz route,m3 lights polished engine,
mk1 golf cabby not alot done but in primer