The apps are just a script for the coding, if you buy pro it opens up long coding and adaptions for editing, it will work on the same device and software you already using for the apps, you can still use apps but if you can also get the codings from all over the net and follow the instructions and get the bits you want working working, the only apps you cannot convert to coding is the vehicle in motion and mirror link in motion because these have a security code relating to your VIN number, and nobody’s cracked that yet (although they did on earlier Audi’s)
So to program in coding what you’d do is find the tweak like needle sweep
Select Control unit 17 (Dashboard)
Control unit long coding
Byte 1
Bit 0 Activate
So in obdeleven you’d connect to car (don’t need scan once you’ve done that once)
Then at the bottom right there’s a button press that and it will give you a list of modules (with pictures)
Scroll down until you find dashboard (and they’ll be a little circle on the right with 17 in it) press that
That will open up a new list with info, long coding,adaptions, security etc
So you hit long codings
This will bring to to another screen, at the top there is a lot of numbers going across the screen and above that on the right there’s 2joined boxes with 0 and 1 in them press that
underneath that it will say byte 00
You want byte 01 so if you press the right green arrow 3/4 Down the page it will go to byte 01
Then you will see bit 0,1,2,3,4,5,6 down the left and check boxes on the right
Press the top box to put a tick in it
Then press and hold the green circle with the tick in it until it says done
And that’s it, when you turn the ignition on the dials will sweep from 0 to max then back to 0
It might sound difficult but it isn’t really