Uprated SMIC for us dervs PICS and LOGS INSIDE

[Adam]

Got the intercooler from here on eBay. All that is needed extra is a SFS bayonet coupler and some 60mm pipe for the bottom. For the top I had a SFS THS169 hard pipe but you could again use a SFS bayonet coupler along with some 60mm piping. Fitted nicely and in all cost me £99.99. It's a steal considering GodSpeed who made it also make the intercoolers for Forge apparently









If anyone wants to go down this route I have a few spare SFS couplers I can part with.

[Rhyso]

So you haven't blown it up yet then? 

[BJD]

Whats the difference between this and the standard? Much gains 

[Adam]

Twice the size and I will do some logs soon

[asif]

Wish this came up a few weeks ago as my standard replacement from GSF + fitting cost me twice that.

[BJD]

Twice the size and I will do some logs soon

You done any logs yet?

[Adam]

Twice the size and I will do some logs soon

You done any logs yet?

Funny you should say that

Its hard to get the same logs back to back. This is a 40-80 sprint In the same gears. Used the same bit of road. There was a 3* difference in temps (Today was 3* colder). What does everyone think [*-)] I was expecting 5* or something but not this.

[topher]

the temp figures are a bit meaningless but the thing to look at there is how the ramping flattens out with the better intercooler, thats when its really working.

[Adam]

the temp figures are a bit meaningless but the thing to look at there is how the ramping flattens out with the better intercooler, thats when its really working.

The what? 

[topher]

the ramp up of the graph it peaks and holds instead of rising

or, "the hilly bit has a flat top now" if you prefer