1) The main concern i have is the wing to a-pillar. the top edge of the wings.
Theres a lip of a few milimeteres at the top of the wing. The inner couple of mm of this lip of the wing that im most interested in. You have to look down onto it rather than straight at it. As it curves down alittle.
It seems that for the first mm or so its body coloured then the last mm or so, or in my cars case ~2mm its like a grey speckled grey? This ratio varies from car to car or in my case wing to wing!
This photo below is of my passenger side one and its got far more blue on than the drivers side.
2) the back of the front wings rather than the hinges/door. The rear of the front wings basically on the ribbed bits (you can see them as you open the door a little just before its first catch either inside of the car or like my photos better from the outside looking down toward it from the other side of the door.
Or by looking through the panel gap from the outside with the door shut at the rear of the wing.
The main concern i have is the wing a-pillar ones the lip inner lip edge of the a-pillars that im most interested in. You have to look down onto it rather than straight at it too see some of them. This panel gap varies wildly between cars too so some you can see better than others.
The question i need answering is of all the ones i have seen so far have i just been unluckie and seen duff ones or is whats on my car normal?