Sorry to tag onto this, I have an issue with the boot lock, the pump all seems to work, the lock works manually but there is a white plastic slider on the actuator arm, I think this should be moved into the correct place for the metal piece on the back of the lock to open the catch. Turning the key one way, the lock should work on central locking, turn to the middle and the lock should be open, turn to the other side and the boot cannot be operated with the central locking. I think the actuator arm is supposed to move the white plastic into the correct position for the central locking to allow the push button to operate the catch, my issue is the white plastic piece does not move with the actuator arm, the arm slides through the middle of the white plastic piece and it then just stays in the position, I can see a notch on the actuator arm, but am not sure if the white plastic should fix one side of this notch or the other? are there spring clips to hold it in place? does anybody have a working boot lid, could take a photo of it so I could see where the white plastic is located? Cheers.