LIST OF PARTS NEEDED FOR 20VT INTO MK3 CONVERSION

[F17BAD]

well mine is near 300ilft and no issues

I'm running a sachs VR6 item with 16v Flywheel

My car goes back for more mapping on the 23rd


I wouldn't advise any cheap clutches tbh..

Whats the spec of your car ?

[jinx]

Spec is MK3 1.8t AGU with some nice upgraded internals and an IHI VF34
got 2 rr printouts, one from 2 years ago with nearly 360bhp and 412 Torque
the other one i got done a week before the clutch went, it showed a drop of 20hp and just 266 torque

So i've put my hand in my wallet and bought a flywheel and clutch that should handle 470 torque, just hope it's ok for daily driving.
Be nice to reclaim some of those torques

[popleyruss]

Yea mate they are the same

Mine is still on its 8v drive shafts. They were the same as the 16v ones

Hi mate lookd at the driveshafts there not big enough for the gearbox cups ?? What ones should I use ?? Are the mk3 gti ones longer ?? The car is a cabrio it's not classd as a gti

[F17BAD]

Yea mate they are the same

Mine is still on its 8v drive shafts. They were the same as the 16v ones

Hi mate lookd at the driveshafts there not big enough for the gearbox cups ?? What ones should I use ?? Are the mk3 gti ones longer ?? The car is a cabrio it's not classd as a gti

yeah mate use GTI ones, mine are the GTI ones, does not matter if they are 8v or 16v

[popleyruss]

Yea mate they are the same

Mine is still on its 8v drive shafts. They were the same as the 16v ones

Hi mate lookd at the driveshafts there not big enough for the gearbox cups ?? What ones should I use ?? Are the mk3 gti ones longer ?? The car is a cabrio it's not classd as a gti

yeah mate use GTI ones, mine are the GTI ones, does not matter if they are 8v or 16v

U can tell I'd been up more than 24 hours lol I offerd the driveshafts up to the mk4 box lol

What throttle cable shal I use

[danmusic24]

how much work is it to alta the wiring loom? is this something you could do yourself? is just a case of changing a few connectors over or a bit more than that?...
thanks dan

[F17BAD]

how much work is it to alta the wiring loom? is this something you could do yourself? is just a case of changing a few connectors over or a bit more than that?...
thanks dan

a bit more than that haha


as for cable, try a mk2 1.3 cable

[Dan_GTi8v]

how much work is it to alta the wiring loom? is this something you could do yourself? is just a case of changing a few connectors over or a bit more than that?...
thanks dan

theres a ce2 wiring loom conversion guide on clubgti. Its for a mk2 ce2 fusebox but its the same fusebox as the mk3 and theres plenty of info in the thread relating to mk3s

http://www.clubgti.com/forum/showthread.php?t=205887

There are also people around who can do it for around £100 if you provide the looms, rubjonny did mine and a very good job it was too, that guys a legend

[dub-gti]

so on that list all i need is the stuff with out the 16v beside?

so in essence every thing engine and engine wiring wise from a 1.8t,

was thinking of buying a 1.8t that had been crashed, but not sure the average price for a cat c/d

[Dan_GTi8v]

if you have a 16v then yeah you only need the 1.8t bits or the custom stuff, though its still a good idea to get some things like engine mounts new